Products
12v 100ah Lithium Ion Deep Cycle Battery
Service Cycle Life: 1500+ rounds (> 80% capacity preservation) Life: 10 years or more
Normal voltage is 12.8 volts, and the cut-off voltage is roughly 10 volts.
Steady Current/Constant Voltage Battery Type
Maximum continuous discharge current is 50A. (5 sec)
LiFePO4 Prismatic Cells Inside
35M is the maximum internal resistance.
Shenzhen Benwei Lighting Technology Co., Ltd. is one of the best manufacturers and suppliers of 12v 100ah lithium ion deep cycle battery in China. Welcome to buy durable products for sale here and get pricelist from our factory. All customized products are with high quality and competitive price.

Compared to Lead Acid batteries, these LiFePO4 cells weigh less than half as much. They may resemble lead acid batteries in appearance, but they operate on a completely new, cutting-edge principle inside. They are essentially constructed of typical prismatic LiFePO4 batteries, which are widely used in portable electronics. All cells are evenly charged and discharged thanks to an internal battery management system (BMS), which also offers security from short circuits, overcurrents, and reverse polarity. Compared to a conventional lead acid battery, which is unprotected and can discharge quickly under short circuit circumstances, resulting in fire and harm, this offers you a higher level of security. To further safeguard the internal batteries, the internal BMS will also control cut-off voltage and regulate discharge.
With peaks of up to 100A, this 100Ah variant has a constant current capacity of 50A. It is not appropriate for a main car starting battery, but it is ideal for house batteries, backup batteries, and practically any other application where a big lead acid/AGM battery would normally be used.
Features: - Significantly lighter than lead-acid and AGM batteries - Sturdy LiFePO4 cells
+ Long life expectancy
Specifications:
Service Cycle Life: 1500+ rounds (> 80% capacity preservation) Life: 10 years or more
Normal voltage is 12.8 volts, and the cut-off voltage is roughly 10 volts.
Steady Current/Constant Voltage Battery Type
Maximum continuous discharge current is 50A. (5 sec)
LiFePO4 Prismatic Cells Inside
35M is the maximum internal resistance.
output connectors: M8 Fasten down
Working Temperature: 0–45°C (maximum output temperature: 60°C)
RH 85% for operating humidity
0-40°C (15-25°C suggested) for storage
Humidity for Storage: RH 50%
|
BENWEI 12v 100ah lithium ion deep cycle battery |
|
|
Nominal Voltage
|
12.8V
|
|
Nominal Voltage
|
100Ah
|
|
Charge Voltage
|
14V - 14.6V
|
|
Components
|
4S2P or 4S1P or 4S4P
|
|
Peak Discharge (8 Seconds)
|
200A
|
|
Continuous Charge / Discharge Rate
|
100A
|
|
Capacity (amp hours)
|
200AH
|
|
Capacity (watts)
|
1280W
|
|
Chemistry
|
Lithium Iron Phosphate (LiFePO4)
|
|
Cycle life
|
2500 times 80%dod
|
|
Depth of Discharge
|
100% DOD
|
|
Reserve Minutes @ 20A
|
600 min
|
|
Reserve Minutes @ 50A
|
240 min
|
|
Self Discharge
|
≤3% per month
|
|
Cell Type
|
Prismatic or Pouch cell
|
|
Modular
|
Parallel Connection or Series Connection
|
|
Connector
|
M8 M6 SCREWS or Aderson Connector with Cable
|
|
Display
|
Voltage V /Capacity % with button available
|
More pictures:






Customer remarks:

Hot Tags: 12v 100ah lithium ion deep cycle battery, China, suppliers, manufacturers, factory, buy, price, best, cheap, for sale, in stock, free sample, 4s lifepo4 battery, daly bms 4s 12v lifepo4, 4s2p lifepo4 bms, lifepo4 bms 4s 200a, lifepo4 4s 12v bms, 4s bms lifepo4











