6000 Lumens 60w Solar Street Light

Shenzhen Benwei Lighting Technology Co., Ltd. is one of the best manufacturers and suppliers of 6000 lumens 60w solar street light in China. Welcome to buy durable products for sale here and get pricelist from our factory. All customized products are with high quality and competitive price.

6000 lumens 60w solar street light

Product Features:

6000 lumens 60w solar street light

>LED light, solar panel, lithium battery and controller,all in one compact design.

EASY TO INSTAL:The installation does not require electrical wire, It only needs to be installed in an open and sunlight placement on the wall, pole, tree, balcony, anywhere outdoor. Ideal for street and roads, courtyard, parks, squares, private gardens, courtyard, etc.

>No wiring,100% solar powered ,easy to install and ship.

>Built-in infrared sensor,can adjust the light output automatically (time control + light sensor control+ motion sensor control).

>IP65 WATERPROOF SEALED ENCLOSURE: Made of high-strength ABS, plastic shell, good heat dissipation can withstand snow, rain, and other weather conditions. Note: Before using for the first time, please turn on the street light switch and charge it in direct sunlight 6-8 hours

>5 Year After-sales Service. For any questions about the product, please feel free to contact our friendly customer service. We promise you 100% SATISFACTION.

>Remote Control: Remote control providing convenience use in long distance for multi modes. Induction mode, constant light mode, timing mode. The remote control distance approx. 26ft.(battery included)

Product Specification:

6000 lumens 60w solar street light

More details:

Correct maintenance of solar street lights

 Solar lighting equipment is much more complicated than sodium lamps in addition to battery panels and controllers, inverters, and electric equipment. Therefore, in order to ensure the continued operation of solar lighting equipment, inspection and maintenance are usually carried out in a week as a cycle.

    Every autumn the equipment undergoes a comprehensive inspection, especially the cleaning and polishing of lighting fixtures and some solar cell modules.

    The solar lighting system that does not solve the photoelectric conversion rate, the volume of the battery and the main problems, such as life and maintenance, will far exceed the maintenance of high-pressure sodium lamps.

Correct maintenance of solar street lights:

1. When there is wind, rain, rain, hail, snow, etc., measures should be taken to protect the solar cell array to avoid damage.

2, Wind, rain, snow or steering immediately check whether the board is after the rainy season, the control room and the battery are indoor water, water, after a storm, check whether the equipment is working properly, the charge and discharge controller is damaged, and so on.

3. The lighting of the solar cell array should always be kept clean. If there is dust or other dirt, it should be washed first, and then gently wiped with clean gauze water. Do not wash with hard objects or corrosive solvents, heuristics.

4. When matching and using the solar cell array, you should strictly follow the battery maintenance method.

5. Check the power system connected to the solar street light to avoid loose connections.

6. Check the grounding resistance of solar street lights.

The design of the solar street light system is not static. Usually need to be designed according to the specific situation of the location. Affecting the configuration plan

There are many factors, such as the average sunshine time, the width of the road, the required daily discharge time, and the longest continuous rainy days.

Below we give a specific example

1. LED light, single channel, 40W, 24V system;

2. The local daily effective light is calculated at 4h;

3. Daily discharge time is 10 hours, (take 7 pm-5 am as an example)

4. Meet 5 consecutive rainy days (plus the electricity consumption the night before rainy days, 6 days). Current = 40W÷24V =1.67 A

Calculation battery = 1.67A × 10h × (5 + 1) days = 1.67A × 60h = 100 AH

     Reserve 20% capacity for battery charging and discharging; the actual current of the street lamp is above 2A (plus 20%

Loss, including constant current source, line loss, etc.)

     The practical battery needs = 100AH plus 20% of the reserved capacity, plus 20% of the loss. 100AH ÷ 80% × 120% = 150AH

The practical battery is 24V/150AH, and two groups of 12V batteries are required: 300AH

Hot Tags: 6000 lumens 60w solar street light, China, suppliers, manufacturers, factory, buy, price, best, cheap, for sale, in stock, free sample, LED Street Light