Knowledge

Home/Knowledge/Details

About the heat dissipation of LED explosion-proof lamps

Generally speaking, whether the LED lamp works stably and whether the quality is good or bad is very important to the heat dissipation of the lamp body itself. The heat dissipation of high-brightness LED lamps on the market often adopts natural heat dissipation, and the effect is not ideal. LED lamps made of LED light sources are composed of LEDs, heat dissipation structures, drivers, and lenses. Therefore, heat dissipation is also an important part. If the LEDs are not well dissipated, their lifespan will also be affected.


Now, the misunderstanding of LED heat dissipation is mainly reflected in the following aspects:


1. The internal quantum efficiency is not high.


That is, when electrons and holes recombine, not all photons are generated, which is generally referred to as "current leakage", which reduces the recombination rate of carriers in the PN region. The leakage current multiplied by the voltage is the power of this part, which is converted into heat energy, but this part is not the main component, because the internal photon efficiency is now close to 90%.


2. The photons generated inside cannot all be emitted to the outside of the chip and then converted into heat.


This part is the most important, because now this so-called external quantum efficiency is only about 30%, and most of it is converted into heat.


3. Excessive reliance on thermal conductivity materials.


Because of what high-tech materials are used, the heat can be dissipated. In fact, ordinary aluminum is used for heat dissipation. After repeated tests, the temperature of the heat sink is only 3-5 degrees Celsius higher than the bottom of the radiator. That is to say, if a material with excellent thermal conductivity can be used, the temperature can be lowered by 3-5 degrees Celsius when the thermal resistance is zero.


4. Superstition heat pipe.


There is no doubt that heat pipes have good thermal conductivity. But the heat derived from the heat sink ultimately needs to be removed by air convection. Without fins to dissipate heat, the heat pipe would quickly reach thermal equilibrium and the temperature would rise along with the heat sink. And if heat dissipation fins are added to the heat pipe, the heat dissipation is still carried out by the fins. And the touch points of fins and heat pipes are not as good as other methods. The result is that the cost is high, and the heat dissipation effect has not been improved. However, it is still useful to use heat pipes to conduct heat on integrated LEDs, but the structure must be reasonable!


5. Believe in the nano-radiation information promoted by some manufacturers.


The proportion of radiation heat dissipation in the current LED lamp temperature of about 50 degrees Celsius can be neglected. And the radiation coating that the manufacturer promotes has a good radiation effect as they promote, even if it reaches the radiation capacity of black body radiation, the proportion of heat dissipation is only a few percent. And the coating itself will hinder the export of heat, thus affecting the heat dissipation of convection.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.