About the use and maintenance of LED projection lamps
The use of LED projection lamps can improve the aesthetics of the room and make the later stage more comfortable, but can the lamp beads of the LED projection lamps be broken and replaced by themselves? Now, let's take a look.
First of all, the LED projection bulb is broken, can I replace it myself?
Oh yes. When replacing the LED projection lamp, please take the following methods:
1. The replacement LED projection lamp is the same as the original LED projection lamp.
2. The positive and negative of the led cannot be reversed. When soldering LED projection bulbs, the time should not be too long. Also, please reduce the power of the soldering iron.
How to maintain the LED projector lamp?
1. The LED projection lamp should not be washed with water during daily use. Avoid water entering the interior of the LED projection lamp and damaging its back components. When wiping, please wipe the dust on the surface of the led with a dry and soft cloth. Note that it cannot be wiped with a damp cloth while the light is on.
2. Moisture-proof measures must be taken for all indoor lighting. Especially for lighting appliances in bathrooms and kitchens, the use of moisture-proof covers can avoid the intrusion of moisture, and the parts inside the lighting appliances will not be corroded, increasing the use time.
3. The application area of Led lights also needs special attention. In the case of ordinary l, in order to avoid unnecessary damage, please do not connect the circuit of the dimmer, delay, and induction switch. In addition, the environment where the LED projection lamp is used should be around 5~40 degrees to ensure safety.
4. The metal area of the Led light needs to be wiped with professional materials, and the back can be cleaned with dust and a feather duster. Regarding the power drive inside the lamp, when a problem occurs, it must be handled by an expert in order not to increase the degree of damage.
Summary: Can the bulb be replaced by yourself? In addition, do we understand how the LED projection bulb is maintained? When the LED bulb is damaged, please repair it immediately so that it can be used normally in the future. However, if it is unclear to you personally, please contact an expert.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
