There are no ultraviolet rays and infrared rays in the spectrum of LED three protection lamps. When used, it has low calorific value, no stroboscopic, and no stroboscopic can protect vision. At the same time, it does not contain mercury and other harmful elements, mercury can be safely contacted, and waste can be recycled. Since there is no loose part in the lamp body, the filament of the fermentation tank is not easy to emit light, heat and burn during use, and has a long service life. It is an extremely low power DC driver.
Especially under the same lighting effect, it is different from the traditional light source
Compared with that, it can save at least 80% energy. Material: because the lamp body is made of engineering plastics, it has the effects of impact resistance, aging resistance and high temperature resistance; The lampshade is made of transparent plastic and injection molding process, which not only has good light transmission, uniform and soft light, but also has the effect of waterproof, dust-proof and anti-corrosion. Novel design, compact structure, convenient installation and maintenance. At the same time, the end cover is made of flame-retardant PC engineering plastic, which has the characteristics of high mechanical strength, no yellowing, no discoloration and the same color as the lamp body. The single lamp head is made of flame-retardant engineering plastics, which has the characteristics of high mechanical strength, radial propulsion and rotation, and good contact performance. Installation method: easy to install because of ceiling type, wall type installation and hoisting
In order to make the LED three protection lights play a role in the production process, correct maintenance is very important, so how to maintain it
1. Don't wash the LED three protection lamps with water, but wipe them with a dry cloth dipped in water. If you accidentally come into contact with water, try to dry it. Do not wipe with wet cloth after turning on the light
2. When using the LED three prevention lamp, the maintenance shall be increased to extend its service life. Indoor lamps and lanterns should be wiped with dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid corrosion or leakage short circuit for a long time; Lamps installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; The lamps installed in the kitchen should pay special attention to prevent lampblack, because the accumulation of grease will affect the brightness of the lamps; The lampshade has good light transmission, but is easy to be polluted by dust. Assuming it is a long or short metal, it can be wiped with a wet cloth to prevent dust accumulation and affect the lighting effect
3. Humidity can easily lead to rust and paint falling off of lamps and shorten the service life of lamps and lanterns. Therefore, dampproof is the key to lamp maintenance, especially on the lamp caps of bathrooms, bathroom lamps and kitchen stoves, dampproof lampshades must be equipped to prevent moisture intrusion, erosion damage or leakage short circuit
4. When using led three protection lamps, try not to switch frequently, because the current through the filament is larger than the current in normal operation. When the lamp is frequently started, the filament temperature will rise sharply and accelerate, which will greatly reduce its service life. Therefore, the switching value of the lamp should be reduced as much as possible.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.




