An important part of the led tri-proof lamp tube: circuit board
The circuit board is an important part of the LED tri-proof lamp tube, and it plays the role of needle and lead for the heat dissipation of the lamp tube. There are two kinds of circuit boards usually used in lamps, one is glass fiber board, and the other is aluminum substrate. Next, the tri-proof lamp manufacturer will analyze the difference between glass fiber board and aluminum substrate for you:
1. Glass fiber board: In order to gain an advantage in price, some manufacturers use glass brazing board as the PCB board for LED lamps. According to different materials and production processes, glass brazing board can be subdivided into glass fiber board, double-sided copper foil glass fiber board, perforated glass copper foil glass fiber board and single-sided copper foil glass fiber board, etc.
Due to these factors, the price of LED lamps will be directly affected. There is also a more cost-effective approach at the expense of heat dissipation, which is to directly arrange the circuit on the glass solder plate. The LED lamps made of the above circuit boards are cheaper than the aluminum substrates, but the heat dissipation effect is not as good as that of the aluminum substrates.

2. Aluminum substrate: It can be divided into three layers from the manufacturing structure. The upper layer is the circuit board layer, the middle is the thermal conductivity and insulation layer, and the bottom is the aluminum base layer. Most of the LED lamps on the market currently use this circuit board.
A. The circuit board layer generally uses copper foil as the conductive circuit. Copper has good electrical conductivity and the price is relatively high. In order to save costs, some manufacturers make the copper foil thinner, so the conductivity will also be affected.
B. The price of thermal conductivity and insulating layer will vary greatly due to different materials. If the thermal conductivity and insulation are very good, special ceramic polymers can be used, but this material is very expensive, and many manufacturers are unacceptable. Therefore, they are looking for other cost-effective materials to reduce costs, such as epoxy resin and glass cloth, which are usually used.
C. The aluminum base layer can be made of copper plate and aluminum plate. The heat dissipation effect of copper plate is better, and the cost will be relatively high. Considering the price factor, the aluminum substrate is generally made of aluminum plate, which has good thermal conductivity and will not be easily bent.
To sum up, the problem faced by the LED tri-proof lamp is heat dissipation. The LED lamp needs enough heat dissipation to ensure the luminous efficiency. The circuit board with good thermal conductivity can prolong the service life of the LED lamp. Therefore, a good LED tube must be equipped with an aluminum substrate with a relatively high heat dissipation coefficient, which conducts heat quickly and dissipates heat quickly. The aluminum substrate is good and the heat dissipation is good.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




