Knowledge

Home/Knowledge/Details

Be sure to take anti-static measures during maintenance of led line lights

Be sure to take anti-static measures during maintenance of led line lights

The led line light is not on, please check whether the power circuit is connected, whether the contact point is not in poor contact, and whether the positive and negative levels of the light bar are connected incorrectly. The chromaticity of the light bar is significantly lower. Please check whether the high power of the switching power supply is lower than the output power of the light bar, or the electrode connecting wire is too thin, causing the electrode connecting wire to consume too much output power. The front face of the light bar is significantly brighter than the back, please check whether the length of the series products is more than 3 meters.


The LED strip light brand must be anti-static: because the LED is a component that is sensitive to static induction, if anti-static measures are not adopted when the LED strip light brand is repaired, the LED will burn and cause consumption. It should be noted here that the soldering iron must use an anti-static soldering iron, and the maintenance staff must also take anti-static measures (such as wearing an electrostatic induction ring and anti-static rubber gloves, etc.).


The led line light brand cannot bear the high temperature: the two key components of the led line light manufacturer, Led and FPC, the led line light brand cannot bear the high temperature again. If the FPC is at a high temperature again or exceeds its withstand temperature, the cover film of the FPC will bubble, which will immediately cause damage to the LED strip light brand. Also, LEDs can't take high temperatures again. After being placed at high temperature for a long time, the integrated ic of the led line light will be damaged by high temperature. Therefore, be sure to use a temperature-controlled soldering iron to maintain the LED strip light bar, the temperature is limited to a certain range, and it is strictly forbidden to change and set it casually. In addition, even so, in the whole process of maintenance, be sure to pay attention to the soldering iron under the LED indicator light for no more than 10 seconds. If this time is exceeded, the integrated IC of the LED route light is likely to be burned.


Led line lights are generally used for company office lighting. The corporate office must maintain a proclamation, seriousness, and dignified atmosphere. Therefore, the linear lights can be neatly arranged in the office area, creating a simple atmosphere, and allowing customers to have a good impression of the company when they enter the company office. The line lights can be neatly installed in the middle of the top of the indoor space, and can also be sorted according to the path of the indoor space. Pay attention to make the light source and chromaticity of the indoor space as symmetrical as possible to establish a comfortable and healthy office lighting environment.

led线条灯厂家

Selection of aluminum raw materials: When selecting aluminum, heat removal and deformation should be considered, which must control the thickness of aluminum appropriately. If the aluminum profile is too thick, it will cause poor heat dissipation; if the aluminum of the linear light is too thin, it may cause poor heat dissipation, and the LED linear light brand is very susceptible to extrusion and deformation during the entire installation process. Regarding the quality of LED lamp beads, there are only a few well-known packaging manufacturers in the industry, but can you tell if this is the brand integrated ic you got? However, the price of this brand of LED lamp beads is very transparent, and the cheap price is obviously inferior.



The long and slender shape of the led line light can match the reasonable layout of the internal wiring of the building, and can also carry out artistic creativity and diversification according to the user's needs or interior decoration style, making the working environment more lifelike. The distinctive decorative design and beautiful scenery of led line lamp manufacturers have left an unforgettable impression on tourists. Line lights are generally used in lighting design, and the number of products is very meaningful. The definition of led line light brand is relatively vague. If linear lighting is universal, it can be called line light.


Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.