Connection method of fire emergency LED tri-proof light
Strictly follow the wiring diagram to connect the circuit.
Each port is connected to the following lines:
①——Connect the live wire L
②——Connect the neutral line N
④——Connect the light source (suitable for the LED light source with built-in driver)
⑤——Connect the drive power supply, and then connect the light source (suitable for externally driven LED light source)
⑥——Connect the wall switch wire, the other end of the switch wire, the port of the incoming live wire ①, the wall switch only controls the mains lighting, and does not affect the emergency lighting;
White socket - connect the battery pack
The emergency power supply cannot be empty. Whether it is to detect the emergency lighting function or the inverter charging function, it must be carried out under the state of the load light source.
Main power line: live line L and neutral line N, directly connected to the main power line, the two lines are prohibited from connecting to the switch
Test button: test whether the battery can be used for emergency lighting. In the power-on state, press and hold the test switch button to switch to the emergency lighting state, release the button, and then enter the mains lighting state.
