Knowledge

Home/Knowledge/Details

Correct installation is a prerequisite

Correct installation is a prerequisite



Correct installation of lamps is the premise of prolonging the service life of lamps. If installed incorrectly, lights can be fragile and in some cases explode, which is very dangerous. At home, light fixtures in bathrooms and kitchens require special care in installation.



Bathroom lights must be equipped with moisture-proof shades. Otherwise, the life of the lamp will be significantly shortened. Kitchen lights require special care to prevent oily fumes, as grease buildup can affect lighting. Lamps; brightly colored lampshades have good light transmission, but they are easy to get dusty, so be careful to wipe them so as not to affect the light transmission; generally, lamps in kitchens and bathrooms should not be placed in places with water. Avoid bursting, steam may condense.


Aging lamps should be replaced early


 The two ends of the lamp tube of the lamp that has been used for a long time may turn red or have black shadows, so it should be replaced in time to prevent the ballast and other dangerous factors from burning out. When you buy a light bulb, the bulb of the light will usually display the expiration date. Regular replacement of aging lamps and bulbs is very helpful for the overall maintenance of lamps.


 The cleaning method should be correct


After the bulb has been used for a while, a thick layer of ash will build up on it. This affects our visibility and should be cleaned regularly. Be careful not to alter the structure of the lamp or subtly alter the parts of the lamp when cleaning. After cleaning and maintenance, please install the bulb as it is, do not lose or install it incorrectly. lamp parts.


In general, the lamp should be wiped with a dry cloth, taking care to protect it from moisture. If the lamp is made of non-metallic materials, you can wipe the lamp with a damp cloth to prevent dust from accumulating and hindering the lighting effect.


Frequent switching on and off lights


Do not turn on and off the light frequently during use. If the lamp is started frequently, the current flowing through the filament will be higher than the current during normal operation, the temperature of the filament will rise sharply, the sublimation will be accelerated, and the use will be significantly reduced. It has a limited lifespan, so try turning the bulb on and off less often.