Details of LED tri-proof light

basic introduction:

LED tri-proof light

Waterproof and Dustproof Lamps

1. Energy saving: reduce the total energy consumption of lighting, achieve the goal of energy saving and emission reduction, and reduce the operating cost of enterprises

2. Using high-quality LED light source, 140W can replace 250W metal halide lamp, 210W can replace 400W metal halide lamp, energy saving more than 50%;

3. Professional light distribution design, optical-grade lens material, high-efficiency drive, improve the efficiency of lamps;

4. Equipped with 1-10V intelligent dimming, it can be equipped with light sensing and mobile sensing equipment to adjust the illumination to improve the energy saving effect.

5. High reliability and maintenance-free: reduce the impact on production after lamp failure and reduce maintenance costs

6. The life of LED light source is more than 50,000 hours, realizing maintenance-free lamps;

detail intruduction:

1. Energy saving: reduce the total energy consumption of lighting, achieve the goal of energy saving and emission reduction, and reduce the operating cost of enterprises

2. Using high-quality LED light source, 140W can replace 250W metal halide lamp, 210W can replace 400W metal halide lamp, energy saving more than 50%;

3. Professional advanced light distribution design, optical-grade lens material, high-efficiency drive, improve the efficiency of lamps;

4. Equipped with 1-10V intelligent dimming, it can be equipped with light sensing and mobile sensing equipment to adjust the illumination to improve the energy saving effect.

5. High reliability and maintenance-free: reduce the impact on production after lamp failure and reduce maintenance costs

6. The life of LED light source is more than 50,000 hours, realizing maintenance-free lamps;

7. Equipped with 50,000 hours LED electronic drive, higher reliability and longer life;

8. The shell of the light source module adopts American die-casting aluminum material and advanced surface spraying technology to improve the corrosion resistance of lamps and lanterns by salt spray;

9. Modular design structure, hollow convection heat dissipation design of light source module, improve heat dissipation performance;

10. The enclosure protection grade is IP65, which can be used reliably in various indoor and outdoor places.

11. Humanized design:

12. It has three light distribution forms: narrow light distribution, medium light distribution, and wide light distribution, which can be selected according to different lighting needs to improve the illumination of the work surface.

13. The lamp has seat type, side wall and ceiling installation methods for projection light and flood lighting, and hanging ring and boom installation methods for high-ceiling workshops.

technical parameter

Rated voltage: 220V

Rated power: 70w 1 module

140w 2 modules

210w 3 modules

280w 4 modules

350w 5 modules

420w 6 modules

LED light source adopts: CREE chip

Luminous flux: 6000lm 9000lm

Average service life: 50000h

Lamp protection grade: IP65