Digital dimming may afford several protocols. The more expensive digital addressable lighting interface (DALI) and newer Bluetooth Low Energy (BLE) interface are beneficial for commercial and industrial applications. All the devices (up to 64) on a DALI network are controlled by an electronic control device, which can allow the network to be administered via online portals.
The dimming itself is achieved through pulse-width-modulation (PWM) managed by a controller and a metal-oxide semiconductor field-effect transistor (MOSFET) switch in the driver electronics at the output of the DC power supply. The driver varies the duty cycle of the pulses to control brightness.
PWM dimming maintains high efficiency and ensures the LED output does not vary in color. And for LED lighting in a DALI network, the same microcontroller that supplies the DALI interface functionality can also supply the PWM signal to the LED driver.
For retrofit projects, wireless digital dimming systems preclude additional control wiring. The downside, however, is that the system can be vulnerable to issues after installation, like the loss of fixture-to-control pairing and IP addresses, battery powered switches which require maintenance, and failed control nodes.
For these reasons, the technical sophistication of the customer should be one of your considerations when deciding whether to recommend a wireless or analog dimming solution.




