Disassembly and maintenance of LED panel light
Disassembly method of led flat light:
1. The square panel light is disassembled and pushed up directly, it is placed directly on it.
2. Pull down the circular flat panel light forcefully. It is stuck by a card. See the installation instructions, and the reverse will work. When removing the light, pay attention to power off.
3. Remove the four frames of the snap-on flat light, and break open the inlaid switches or buttons.
4. To remove the flat panel panel of the integrated ceiling led light, first use a suction cup to buckle down the gusset plate next to the LED, and then it can be removed smoothly.
LED panel light maintenance instructions:
Notice 1: Before cleaning the LED panel light, be sure to confirm whether the power supply has been disconnected before cleaning the panel light.
Notice 2: When cleaning the LED panel light, most people will use a semi-dry and wet rag to wipe it. This is impossible, and it must be wiped with a dry rag.
Notice 3: In order to achieve a better cleaning effect, some people will use chemically corrosive things to clean, which has certain safety hazards.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
