Knowledge

Home/Knowledge/Details

Does the LED soft light have a driver?

The requirements for the driving power supply of LED light strips are almost harsh. Unlike ordinary incandescent light bulbs, LEDs can be directly connected to 220V AC mains. LEDs are driven by a low voltage of 2 to 3 volts, and complex conversion circuits must be designed. LED lights for different purposes should be equipped with different power adapters.


        Since LEDs are characteristic-sensitive semiconductor devices and have negative temperature characteristics, they need to be stabilized and protected during application, resulting in the concept of driving. The driver is the core component of the LED soft light strip and plays an important role in the work of the LED.


       LED flexible light strip AC drivers are also divided into three circuit types: buck type, boost type, and converter type according to different applications. The difference between an AC drive and a DC drive is that in addition to rectifying and filtering the input AC power, there is also a problem of isolation and non-isolation from a safety point of view.


LED flexible light strip DC drivers can be divided into three types according to their different functions and uses.


1. DC step-down driver. The basic principle is to use switching devices and reactive devices to step down and limit the current of the external power supply, and then drive the light-emitting tube to work. The series step-down driver has a simple structure and high conversion efficiency. The main disadvantage of this kind of driver is that once the main switching device is damaged, the large current will directly pass through the LED to burn the LED. Obviously, this scheme cannot be used when the supply voltage is lower than the voltage drop of the load tube.


Second, the converter type driver. It uses switching devices and high-frequency transformers to transmit energy from primary to secondary, and at the same time does voltage/voltage conversion to drive light-emitting diodes. The voltage at the output end of the driver is not restricted by the input voltage, and can be designed arbitrarily according to the number of LED soft light strips that need to be connected in series. The application is flexible, and it is suitable for use in the situation where the supply voltage fluctuates near the voltage drop of the load tube. It is also suitable for the supply voltage and The load tube pressure drop varies greatly.


3. DC boost driver. Its basic principle is to use switching devices to work with reactive devices to store energy, boost voltage, and limit current. The conversion efficiency of the boost driver is also relatively high. Its more significant advantage is that it will not damage the light-emitting tube when it fails. Boost drivers can only be used where the voltage drop across the load tube is always higher than the supply voltage. When the voltage of the load tube is lower than the power supply voltage, the driver will run out of control, and the large current will directly pass through the LED to burn the LED.


Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.