Elements of LED projector lamp product identification
With the continuous improvement of skills, there are more and more imitations. Taking a lamp as an example, it can be seen that there are many similarities. The quality of LED projection lamps is also very different. The projection lamps will answer your questions. There are also many differences in the production environment and craftsmanship. When purchasing projection lamps, we will judge their quality from the following points:
1. The overall survey: "Power factor of LED projection lamp head": low power factor, indicating that the driving power supply and circuit design used are not good, which will greatly reduce the service life of the lamp. The number will not be long.
2. my country's LED lighting safety regulations have been introduced, and the products must comply with the safety regulations stipulated in my country.
3. Looking at the heat dissipation system of the LED projection lamp head, the heat dissipation of the LED projection lamp directly affects its quality and service life.
4. Look at the quality of lamp beads: The quality of lamp beads directly determines the quality of LED projection lamps, and the quality of lamp beads depends on chip quality and packaging skills.
5. Look at the light effect: the same lamp bead power, the higher the light effect, the higher the brightness, the same lighting brightness, the lower the power consumption.
6. Looking at the driving power used by the industrial and mining lamps, the service life of the power supply is much shorter than that of other parts of the lamp.

The life of the power supply affects the overall life of the lamp. The theoretical life of the lamp bead is 50,000-100,000 hours, while the life of the power supply is 0.2-30,000 hours. The design of the power supply and the selection of materials will determine the service life of the power supply.
Notes on the use of LED projector lamps:
1. LED projection lamps should check whether the power supply voltage is consistent with the rated voltage of the lamps.
2. The lamps are fixed with a chain hanging device, and the installation surface should be flat and have sufficient mechanical strength.
3. There are 1 ground wire (yellow) and two power wires on the LED projection lamp.
4. Turn on the power, the light is on.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




