Knowledge

Home/Knowledge/Details

Explosion-proof LED lights open the outside of the housing to connect the wires

Explosion-proof LED lights open the outside of the housing to connect the wires

Explosion-proof led light explosion-proof concept and fire-proof type, explosion-proof type is an explosion-proof type that takes measures to allow the interior and prevent the flame from spreading. It is an explosion-proof type. Because the shell of this type of explosion-proof lamp is generally made of metal material, it has good heat dissipation, high shell strength and good durability, and is very popular with users. Moreover, many components of increased safety explosion-proof lamps, such as lamp sockets, interlock switches, etc., also use explosion-proof structures. Electrical equipment with flameproof enclosures is called flameproof electrical equipment. If the gas mixture enters the flameproof enclosure and is ignited, the flameproof enclosure can withstand the pressure of the gas mixture inside and prevent the internal mixture from propagating to the surrounding of the enclosure. This is a kind of gap explosion-proof principle, that is, a structure designed on the principle that the metal gap can block the spread of the flame and the temperature of the product, and the flame will subside, cool down, and expand.


Explosion-proof LED lights open the outside of the housing to connect the wires. When introducing the sealing ring of the device, it is necessary to ensure its reliable pressing and clamping the cable. The use of blocking plate and compression nut to reliably seal the remaining unused inlets on the lamp, so that its explosion-proof and protection level functions are guaranteed. Before the lamp is put into use, it is necessary to solidly ground the inside and outside and connect the user's on-site grounding system. When doing lighting installation and maintenance, remember not to open it with electricity. The casing shall be provided with a striking permanent embossed or debossed "Ex" logo. The nameplate shall be installed in the obvious place of the casing. Warning signs must be clearly visible and placed in appropriate locations. For example, the warning sign "open the cover after power off" must be set near the opening cover.

防爆LED灯BAD85-I-C

Because explosion-hazardous places are often accompanied by the presence of corrosive gases, the signs on the shell of explosion-proof lamps must be made of bronze, brass, stainless steel or not less than the aforementioned made of other materials. It should also be securely fixed and not easily obliterated or dropped. The way to check the durability of the symbol is: rub it with a cloth soaked in water for 15s and let it dry, and then wipe it with a cloth soaked in gasoline for 15s. After visual inspection, the symbol should be clear and not fall.


Explosion-proof lamps should be checked from the nameplate and product specification before installation: explosion-proof type, group; protection level of the shell; installation method and fastener requirements for installation, etc. The device of the explosion-proof lamp should be fixed reliably, the fastening bolts should not be replaced arbitrarily, and the spring washers should be complete. When installing the dustproof and waterproof sealing ring, keep it as it is. At the cable entry, the cable and the sealing gasket should be closely matched, and the section of the cable should be round. The remaining wire inlets must be blocked according to the explosion-proof type, and the compression nut must be tightened to seal the wire inlets.


Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.