Knowledge

Home/Knowledge/Details

Explosion-proof LED lights should be paid attention to when maintaining

1. Regularly eliminate the dust and grime on the shell of the explosion-proof LED lamp, and improve the light efficiency and heat dissipation performance of the lamp;


2. The cleaning method can be based on the protection ability of the LED explosion-proof lamp shell, using water spray lamps to symbolize the yin or above or wipe them with a damp cloth;


3. When cleaning with water, the power supply should be cut off, and it is strictly forbidden to wipe the transparent parts of the plastic shell of the lamp with a dry cloth to avoid static electricity;


4. Check whether the transparent parts have been impacted by foreign objects, and whether the protective net is loose, desoldered, corroded, etc. If there is, stop using it and repair and replace it in time;


5. If the light source is damaged, turn off the light in time and tell the replacement to avoid electrical components such as ballasts being in an abnormal state for a long time because the light source cannot be started;


6. If there is accumulated water in the lamp cavity of the LED explosion-proof lamp used in a humid environment, it should be removed in time, and the sealing parts should be replaced to ensure the protective function of the shell;


7. When opening the lampshade, the cover should be opened after the power is cut off according to the request of the warning sign;


8. After opening the cover, check whether the flameproof contact surface is in good condition, whether the rubber seal is hardened or sticky, whether the wire insulation layer is green and carbonized, and whether the insulating parts and electrical components have deformation and scorch marks. If these problems are found, they should be repaired and replaced in time. ;


9. Before closing the cover, use a damp cloth to avoid overly wet and lightly wipe the light and transparent parts of the lamp to improve the light efficiency of the lamp. A thin layer of replaceable anti-rust oil should be applied on the flameproof contact surface, and attention should be paid to sealing when closing the cover. Whether the ring plays a sealing role in its original position;


10. Some of the sealed LED explosion-proof lights should not be disassembled and opened frequently.


Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.