High bay lights are further divided into local lighting and general lighting
Local lighting is a kind of lamps that improve the illuminance of a certain working part. Its function can be to strengthen and supplement lighting on the basis of general lighting, or it can be used as temporary lighting in some places that do not need lighting at ordinary times (such as equipment repair and maintenance places). There are mostly no strict regulations on their light distribution. Local lighting lamps are usually installed near the work area, and use incandescent lamps and tungsten halogen lamps with safety extra-low voltage ≤50V, AC RMS as the light source. There are (portable) running lights, hanging lights, work desk lights, machine tool work lights, etc. In some tall workshops, spot lights are sometimes used for local lighting.
Generally, the lighting lamps are usually arranged evenly on the top or side walls of the work site to illuminate the entire work surface. It is necessary to use incandescent lamps, halogen tungsten lamps, high-intensity gas discharge lamps or a large number of fluorescent lamps with high power. Most of the high bay lights belong to this category. Generally, lighting lamps have higher requirements on the distribution of light, and two types of light distribution, direct lighting type and semi-direct lighting type, are widely used, especially the latter. Part of the semi-direct lighting type illuminates the ceiling with upward light, which can increase the brightness of the ceiling and create a more comfortable and brighter environment.
In order to work reliably for a long time in places with poor environmental conditions such as dusty and humid, mining lamps have special requirements in terms of structural design, shell and reflector. In dusty environments, closed lamps or convection lamps with upward luminous flux should be used; in humid environments, attention should be paid to the airtightness of the casing and the surface treatment of the reflectors; generally, open lamps are commonly used in indoor environments, using enamel surface reflectors, surface oxidation Aluminum reflector with thick aluminum film layer or coated with silicon dioxide protective film; considering the inevitable vibration in the production site, the fixed light source should use anti-loosening lamp holder, etc.
Now traditional high bay lights are being phased out gradually, and LED high bay lights are slowly replacing them.
New technologies, new materials and new processes are continuously applied to the design of LED light sources, laying a solid foundation for the design of LED lamps. Due to the large differences in the application products of the same LED light sources, the introduction of standards such as design and testing has certain requirements. Lag, so the products produced by different manufacturers have poor interchangeability in terms of structure and performance. At the same time, LED lighting products themselves are an integration of mechanical, optical, electrical and other factors, and their design involves technologies in many fields. . And what are the advantages of the products provided by Xingbang Yaming?
1. Technology
1) The wick is a 5730 chip, a Sanan chip with enough watts
2) Power supply: constant current power supply (anti-voltage instability, light flickering, stroboscopic does not hurt eyes)
3) High temperature test: 100 degree oven for three days and three nights
4) Anti-aging test
5) Pure gold wire/copper bracket
6) Heat dissipation aluminum: using aviation heat dissipation aluminum
2. Product structure
1) PC cover: high temperature resistant/unbreakable/milk white
2) Anti-scattering angle of light source: 165-170 degrees (180-20/15)
3) Aluminum substrate: lamp beads / low power 5730 lamp beads
4) Thickness of heat dissipation aluminum cover: 1.0
5) Installation height: more than 4 to 5 meters
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
