How to adjust LED landscape lights
LED landscape light is an indispensable type of street light in the metropolis. It not only has its own comfortable appreciation, but also focuses on the harmony between the phenomenon of artistic light and the culture of the scenic spot and the surrounding environment. Phenomenal lights use different shapes, splendor and brightness to describe the scenery. For example, the red lantern style led landscape lights bring a festive atmosphere to the square. So how to install and adjust LED landscape lights:
1. Assembled LED landscape lights and inserted into the bulbs. LED landscape lights do not touch the direct halogen light bulbs with your fingers, because the oils from your skin may shorten the life of the bulbs.
2. Place your planned lamps and equipment on the ground. Try to keep your lights lurking in bushes and lawns. When there is a hidden light source, the light is revealed, not the light fixture.
3. Transformer for operation, cable LED landscape light. Lay the transformer on the ground, don't install it at the moment. Disconnect at least 5 slack foot transformers and then slack job lines for each fixture depending on your structure.
4. Create your talk. Use the cables discussed by direct burial fusion to sustain various phenomenon lighting fixtures.
5. Run the wires to the transformer, not the device on the wall. Every time the operation line goes to the cooperative terminal for a while, and then to the 12-volt tap water terminal for a while. The transformers are marked on these terminals, and each can have multiple wires going to it. Do not use a higher tap voltage on this terminal Euro will get the next. After each wire lasts, it can be plugged into the transformer.
6. Adjust the equipment of any angle and orientation. Straighten and coil each neat finished cable job to tie the cable and wrap the wire. Once the cables are placed in the correct orientation, they are buried in the ground. It is less likely to be cut when digging, as you will see the cables buried in the mulch when you clear the cage cover. Bury cables in the lawn on the ground. The cables span from the bed to the ground floor, buried deeper, and cut PVC pipes on both sides to place a seam on the cables as maintenance conduits.
7. Make sure the lights are in place, change any light bulbs, glare inspection equipment and fine-tuning.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
