Knowledge

Home/Knowledge/Details

How to choose the installation position of LED explosion-proof lamp

1. The explosion source is far below the dangerous or away from the installation position of the electrical circuit, and the explosion-proof circuit with explosion danger is mainly steel pipe or cable wiring.

2. Electrical installation wiring, as well as different parts of protective pipes, cables or pipes passing through walls or explosive gas layers and non combustible materials, shall be tightly blocked.

3 in the framework of distribution lines, copper conductors or cables with explosive gas environment hazard level 1 shall be used. More copper conductor cables shall be selected for vibration, such as copper wires or multiple strands.

4. Wires or cables shall be used within the scope of section 2-4 and above of the risk level in the power line explosion hazardous area, and the lighting circuit shall exceed 2.5mm ² Can be connected with aluminum conductor wires or cables.

5. The selection of insulated conductor cross-section allows the long delay current carrying capacity of cables and wires to be not less than 1.25 times of the current set for overcurrent tripping of rated fuses and circuit breakers.

Led explosion-proof lamps are mainly used in petrochemical plants, basins, outdoor or indoor equipment pipes, instruments with local lighting range, or areas such as pedestrian tunnels. The lighting configuration requires uniform lighting, high light, high brightness and good performance (maintenance free).

Area and range from 0 to 1, because most of the lamps in this area are very strict. The basic requirements for separation are a major outdoor area, which requires good waterproof lamps and corrosion resistance. In most areas a few meters away, even hundreds of meters high, high temperature and high pressure, it is very difficult to change the lamps and maintain them.

Generally, the mercury lamp ballast type explosion-proof fluorescent lamp with low explosion-proof grade and low luminous efficiency of waterproof performance is used with pressure or increased safety. In particular, its service life is short, its safety is poor, its frequency is frequent, and its maintenance volume is large, so it is the main safety problem. The safety and long service life of LED explosion-proof lamps solve this problem. The industry needs explosion-proof led explosion-proof lamps with great development potential. Led explosion-proof lamps need less maintenance to reduce accidents.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.