How to choose the materials of common tri-proof lights?
Tri-proof lights are generally used in power plants, steel, petrochemicals, ships, exhibition halls, underground parking lots, villa basements and other industrial lighting fixtures with strong erosion, dust and rain.
Let's take a look at how to distinguish the material of the three-proof light:
1. Watch the national inspection report; wipe the contents of the lamp with a soft damp cloth, and mark it as passing;
2. The qualified LED energy-saving lamps can be used normally for 5,000 hours under the premise of testing, and within 2,000 hours. On, if it does not meet this standard, it is lime;
3. During the whole process of safety delineation, installation, and removal, is the client's test cap loose, and whether there is a crooked neck, right? Insulation
4. Purchase these products that are strongly introduced in accordance with the safety verification and the national energy-saving lighting project, and do not purchase three products;
5. Check and check, it is necessary to pay attention to whether the lamp tube and the shell are loose, whether the phosphor is symmetrical, the thickness of the lamp tube has not changed too much, and whether there is the existence of particulate matter. Good products should also be properly applied to increase their useful life.
6. The manufacturer should ensure all safety protection and safety compliance. Only by making preparations in advance can it reach a certain level, beyond the average life of 8000 hours. Before the marking problem occurs, there is a certain quality assurance, and the electronic town must also be considered. The functional parameters of the flow device.
The above is how to choose the materials of common tri-proof lights brought by Xiaobian. Welcome bosses in need to call for consultation!
