Selecting the right LED tri-proof lighting can be a real challenge especially when you are a beginner. You have to conduct in-depth research and choose the right and high-quality manufacturer. You will come across a lot of manufacturers but making the right decision can become difficult for you. To make the decision process easy, you can go three ways. These two ways are
You can consult any expert manufacturer you know.
You can consult with your friends that previously used or still using LED tri-proof lights.
You can conduct research through the internet on your own. At this point, you need to read buying guides.
Now, if you have chosen any of these ways, you have to consider a few factors. These factors are listed below:
1)Environment Consideration,
First of all, you should be very clear about the environment that you are planning to lighten. This can make you clear about factors such as size, type, lumens, IP rating, and other factors for your LED tri-proof lights. Once you decide on this part. Now you have to move next.
2)Decide Shapes and Sizes Of Light Fixtures
If you have observed all the environment and its requirements, you have to decide about fixtures. It is because the LED tri-proof lights are available in different shapes and sizes. Therefore, you wouldn’t be getting a lighting fixture that could fix in every space. You can solve this problem by taking proper measurements of your space. This will let you know about the total number as well as the size of your fixtures. Once you are done with this part, now you have to move to the next; wattage selection.
3)Calculate Wattage Requirement
Based on your environment and working hours, you need to decide about the wattage of your lights. The wattage selection is important because it can affect the three most important aspects of your lighting system.
First of all, the monthly costs or electricity bills depend upon the wattage of your lighting system. At this point, you need to make calculations about wattage and then its electricity bills. This can help you arrange the budget accordingly.
Secondly, you should also consider your space’s power load while choosing a lighting system. If you have chosen a system that consumes power more than your space’s limit, it will result in an electrical load.
Thirdly, you have to decide how much lighting you want in terms of brightness. This can help you calculate the wattage of your system.
4)Color Of LED Tri-proof Lights
It is important to select the right color for your LED tri-proof lights. Selecting the wrong color can affect the productivity of your workers at the site. At this point, you should be able to figure out the right color for your LED tri-proof lights.
5)Must Calculate Lumens Requirements
You should make sure that you have chosen a product that gives enough brightness to your environment. It will ensure optimal performance. The brightness can be measured in terms of lumens.
6)Check Functions and Features
You should check the features of your LED tri-proof lights before you buy them. Or at least you should be aware of what kind of features and functions you want in your LED tri-proof lights. So common features are dimming, emergency lighting, and motion sensor lights.
7)Decide Installation Process
Lastly, you should be very clear about whether you want a ceiling-mounted installation or a suspended mounted installation.
Important tips:
Conduct market research
Choose the right manufacturer
Contact the selected right manufacturer
Consult the manufacturer
Test the product before using it.
