How to ensure that the appearance regulations of led line lights comply with the new project regulations
The compact and lightweight bearing end cover and mounting bracket of the led linear light are made of aluminum alloy profiles, high-pressure aluminum die-casting heat-resistant silicon silicone sealing rings, to ensure the reliability of moisture resistance. This light can be installed independently or in combination. Applicable to all kinds of buildings, indoor or outdoor parts or contour lighting. The key reason for the high definition of led line lights is to select electronic optical grade PC materials with high diffusivity, no glare and no shadows. The diffusivity of the diffused PC can reach 99%, the dispersion is uniform, there is no crystal point, the light transmittance can reach 86-93%, and the chromaticity is more than twice that of the traditional lamp cover.
When it rains or snows, and when the lighting effect goes out, the temperature of the well-known brand of led linear lights will drop sharply. The sudden drop in temperature will cause a vacuum pump to operate at an even higher pressure for a moment inside the lamp cover. At this time, gas or moisture in the body will secretly enter the lamp arm according to the sealing gap and solidify into water droplets. Once the airtight lamp arm causes water droplets, it will not be easy to drain it out. The water droplets that cannot be discharged for a long time will corrode the electronic components of the lamp body and seriously endanger the service life of the LED linear lamp.
The led line light brand generally uses aluminum as the heat pipe radiator. The larger the total contact area between the heat pipe radiator and the gas, the better it is for heat removal. All the LED lamps work smoothly, with a small light attenuation coefficient and long life; the vents can prevent mosquitoes from crawling during the entire application process and endanger the lighting. The actual effect of the luminaire may cause unnecessary hazards.
The color palette is the reference target, which is the reference target for the color solution of the led line light. Because the led line light is installed in the building, the led line light manufacturer will carry out matching according to the color on the factory nameplate.
The whole process of customizing the appearance and color of led line lights is very complicated. The more colors the sample has, the greater the customization process and difficulty. Although the cost will increase relatively, the beauty and generosity of the building will be further improved. Bright red, emerald green and blue lamp beads are used as three natural colors, and they are indicated by the wavelength of light, and the chromaticity is indicated by MCD (relative density of indoor space of lumen value).
The key reason for the stronger light transmittance of led line lights is to choose electronic optical PC materials with high diffusivity, no glare and no shadows. The diffusivity of the diffused PC can reach 99%, the dispersion is uniform, there is no crystal point, the light transmittance can reach 86-93%, and the chromaticity is more than twice that of the traditional lamp cover.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
