LED purification lamps must be wired according to the diagram: the red wire is connected to the live wire, and the green wire is connected to the neutral wire; it is strictly forbidden to install switches on the red and green wires! The yellow wire is connected to the lower pile head of the switch (the outgoing side); Connect the red wire to the same-phase live wire! The switch is only controlled for normal lighting, and the LED purification lamps are not controllable for emergency lighting. It is strictly forbidden to power on the yellow line when the red line is powered off. In this state, it is easy to damage the emergency power supply device that should be used for LED purification lamps! It must be charged for 24 hours before use, and no-load (no light source) state is strictly prohibited in emergency!
LED purification lamps, a kind of lighting lamps, are suitable for installation in offices with suspended ceilings. The light source is generally a fluorescent tube. Divided into embedded and ceiling type. Mirror aluminum grille lamp, the grille aluminum sheet is made of mirror aluminum, with a deep arc design, and the reflection effect is better. The chassis of the LED purification lamp is made of high-quality cold-rolled plate, and the surface is treated with phosphating spraying process, which has good anti-corrosion performance and is not easy to wear and tear. fade. All plastic fittings are made of flame retardant material.
LED purification lamps are generally used in FFU clean rooms. Such clean rooms are generally above class 100, and most of them are electronic workshops. Such workshops generally require yellow light (such as lithography rooms), and the lamps are yellow (coating). A layer of yellow filter film), which can filter visible light with wavelengths below 500nm. LED purification lamps are widely used in high-demand and high-standard purification lighting fields such as medicine, health, biology, food, chemical industry, electronics, scientific research, etc.
The nickel-cadmium battery in the LED purification lamp is automatically charged and discharged without special monitoring. The lifespan is 500 times of charge and discharge cycles, which means it is scrapped, so try to avoid man-made power outages.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
