How to improve the service life of LED explosion-proof lights?
In order to ensure the performance of LED explosion-proof lights, users should pay attention to the following points during use, namely:
1. Regularly clean the dust and other debris on the lamp housing (if it is not cleaned for a long time, the dust will adhere to the lamp, block the heat emitted by the lamp, and cause the heat to be unable to dissipate. This is to ensure the good heat dissipation effect of the LED explosion-proof lamp). Good heat dissipation is an important factor in prolonging the life of LEDs.
2. Check whether the transparent parts are damaged by foreign matter, whether the protective net is loose, desoldering or corroded. If so, please stop using it and repair and replace it in time.
3. Before closing the lid, use a damp cloth (not too wet) to gently put the lamp and transparent parts back in place to improve the light effect of the bulb. The surface of the fire joint should be coated with a layer of 204-1 replacement anti-rust oil. When closing the lid, pay attention to the seal ring to seal in the original position.
4. If water accumulates in the bulb cavity used in a humid environment, it should be removed in time and the seal should be replaced to ensure the protective performance of the shell.
5. The sealing parts of the lamp should not be disassembled and opened frequently. Community road closure technology; more in line with the country’s new explosion-proof technology.
6. The lamp was repaired and stopped intermittently. It is recommended that the lamps do not work for 24 hours, because the temperature of the lamps will gradually rise during uninterrupted work. The higher the temperature, the greater the impact on the lamp life. The higher the temperature, the shorter the lamp life.
7. If the light source is damaged, the bulb should be turned off in time, and the bulb should be notified to replace it, so as to prevent the ballast and other electrical components from being abnormal for a long time due to failure to start.
8. When opening the lampshade, please follow the requirements of the warning sign and open the cover after disconnecting the power supply.
