How to install downlight
1. How to install the downlight
1. Before installation, read the instructions in detail to determine the size of the downlight and the size of the opening on the ceiling;
2. After the size of the opening is determined, the location of the opening can be determined and marked on the ceiling. The opening tool is recommended to use a small hand saw. If you don't have a clear grasp, please ask a professional master to avoid sawing the ceiling;
3. Connect the originally reserved power cord and downlight in the ceiling according to the instructions, and the cable head must be well insulated;
4. After the line is connected, adjust the position of the downlight to ensure that the height of the spring sheet is consistent with the thickness of the ceiling, and then snap the downlight spring into the hole of the board;
5. After the lamp holder is fixed, you can press the bulb.
2. Precautions for installation of downlights
1. The installation position of the downlight should not be too close to the wall. When the downlight emits light, it will generate heat; if it is used at a close distance for a long time, the wall that is close to it will be baked yellow, which will seriously affect the aesthetics of the indoor wall.
2. The gas of the downlight should not be too strong. Because the downlight is relatively close to the sofa, direct light will cause damage to human eyes; it is recommended that you choose a light source intensity of 5 square watts per watt, and choose a light with a soft color.
3. After buying the downlight, you must first check whether the parts inside are good or bad, and whether there are any shortages; if any problems are found, feedback to the dealer or manufacturer as soon as possible and replace them.
4. When connecting the line, be sure to cut off the power supply to ensure that the switch is completely closed to prevent electric shock accidents; after the light bulb test is lit, do not touch the surface of the lampshade; the installation location is best away from heat and steam sources to avoid it. affect lifespan.
5. The choice of installing the power supply should be determined according to the number of downlights; it is also necessary to ensure the load-bearing capacity of the ceiling and whether it can withstand all the downlights.
6. The working environment of the downlight is 110V/220V under high voltage, which is not suitable for use in the environment of frequent power-on and power-off, which will cause great loss to the downlight.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
