When compared to conventional street lights, solar street lights are more simpler to install and maintain. Solar street lights are an excellent option for places with little to no access to a power grid due to the benefit of not needing any cabling. Because it operates without fuss, this outdoor lighting system is inexpensive and in demand. Solar street lights may be installed without any complex power infrastructure or underlying cable construction. The cost of operation is low since the lights only use solar energy, and because they are not linked to the grid, you also save on labor and upkeep.
Solar panels, controllers, batteries, and the light source make up integrated or split solar street lights. The solar panel is supplied separately from the battery and luminaire in integrated solar street lights. Depending on the area to be lit, integrated solar street lights may be mounted on either a pole or a wall. There are a few things to keep in mind in order to fully and properly profit from your installed unit:
PREPARATION
The first stage in installation is selecting the appropriate place. It is advised that you choose a location where there is continuous direct sunshine so that the battery can charge fully and provide adequate brightness and backup after nightfall. The selected surface should be level or slightly sloping. Solar street lights are often installed by experts, but because the procedures are straightforward and uncomplicated, anybody can complete them with the assistance of one or two individuals and some simple spanners and screwdrivers. It is crucial to study the manufacturer's installation instructions and get acquainted with the integrated solar street light unit's parts. All of the components required for a successful installation should be included in the package. The earth should be excavated at least three feet deep to install the pole once you have located and secured the place and gathered all the required materials.
ATTACHING PANEL AND LUMINARY
All of the parts need to be joined to the pole before it is built. Since solar panels are the main component of any solar lighting system, extreme caution should be used while handling them. To understand how the solar panel, battery, and other equipment interact with one another and how to connect the cables appropriately, read and comprehend the user manual. The arm should be equipped with both the solar panel and the illumination unit. The arm is then lifted off the ground for convenient access and fastened to the pole after that.
Carefully remove the LED fixture from the kit, setting it on the ground with its upward facing side. Once again, carefully follow the directions in the handbook and use screws to fasten the light holder to the arm. Once the arm is ready with the solar panel and light properly connected to it, mount the arm to the pole and secure it with the bolts included in the kit. The solar panel is also fixed to the arm. Check that everything is now linked according to the instructions. Before lifting the pole, the wire connections must be examined. Make sure the solar panel is oriented to receive the most sunshine possible. The desired pole diameter is 2.5 inches, and the typical installation height is 4 to 5 meters.
COMPLETE CHECKS AND HOISTING THE POLE
It is usually preferable to charge the solar street lights in advance so that you can quickly assess if everything has been connected correctly and whether the lights are operational after installation. Once again, keep in mind that the direction of the solar panel may be modified in accordance with the direction of the sun, and depending on the weight of the pole, you can lift the pole upright with the aid of a crane or with a minimum of effort. As the base for your solar street light, the pole has to be carefully inserted into the hole that has already been dug in the ground and cemented with concrete. Make careful to have an equal spacing between poles when installing several integrated solar street lights to cover a broader area; the recommended installation distance is between 10 and 15 meters. This aids in distributing light around the space in a consistent and effective manner.
Wall mounting is an option for certain All in One Solar Street Lights and integrated solar street lights. The luminary and panel must be mounted to the arm, which must then be fastened to the wall using anchor bolts, after determining a shadow-free location where the panels may get enough direct sunlight and after determining the height at which the unit must be put. To illuminate a greater area, integrated solar street lights may be installed on both public and private premises. Due to the larger size and longer backup time of the solar panels employed, integrated solar street lights often charge more quickly. They are perfectly adapted to all environmental situations and are widely renowned for their fading qualities.
Integrated solar street lights don't need any maintenance after installation since they turn on and off automatically at dusk and sunset, respectively. If necessary, however, you may clean the panels to improve brightness and efficiency. In order to prevent water stagnation, the solar panels are angled, and rainwater washes off the majority of the dirt and dust that has collected on the panels. You may now pick from a choice of solutions provided by manufacturers and dealers of integrated solar street lights. The ideal integrated solar street light for your requirements will depend on how well you understand the characteristics of each item and how thoroughly you discuss this with your dealer.
