1. Select the best position for the light pole, the light pole should use iron or steel raw materials with a diameter of 3-6m, a diameter of 50-90mm, and a wall thickness greater than 2.0mm.
2. Before opening the package, please check whether the parts are complete.
3. When installing practical products, the cable should be pre-installed on the light pole, and the cable should be introduced into the electrode side of the top of the pole. In the case of confirming that the power supply is disconnected, connect the cable to the input line of the fixture, and pay attention to the identification of the power input line. Then wrap it carefully with waterproof electrical tape (only mains compensation products are used for this step).
4. Insert the key into the electronic key hole, turn clockwise to the green point, and then pull out the key.
5. Insert the lamp tube into the lamp pole, and use special tools to tighten the anti-theft screw to ensure the stability of the lamp.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
