How to install the LED street light source? The problems that should be paid attention to when installing LED street lights
It is very important to install the product correctly. The difference between LED street lamp manufacturers and conventional street lamps is that the LED light source adopts low-voltage DC power supply, and is a high-efficiency white light synthesized by GaN-based power blue LED and yellow. It has high efficiency, safety, energy saving, environmental protection, long life, fast response speed, and display. Unique advantages such as high color index can be widely used on roads. The outer cover can be made, the high temperature resistance can reach 135 degrees, and the low temperature resistance can reach -45 degrees. With the rapid growth of the national economy, the contradiction between my country's energy supply and demand has become increasingly prominent. There is a serious shortage of power supply, and energy conservation is an urgent problem to be solved. Therefore, the development of a new type of high-efficiency, energy-saving, long-life, high color rendering index, and environmentally friendly LED street lamps is of great significance to the energy saving of urban lighting. Do you know how to install street lights when installing LED street lights? What are the precautions when installing LED street lights? Below we introduce to you the precautions when installing LED street lights in Jiangsu.
How to install the LED street light source?
First of all, let us look at the installation of LED street light sources, and make sure to distinguish the signs when installing LED street light sources. The light source used for solar lamps is generally DC 12V or 24V. During the installation process, voltage and power must be distinguished, and matching light sources must be used. Due to the difference of light source power and lighting time, the wiring must be carried out strictly in accordance with the corresponding wiring diagram; since each lighting system is an independent working unit, the time to switch the lights is normal and slightly different. When replacing the light source, pay attention to the size of the light source and do not replace products of different models. Let us look at the precautions when installing LED street lights.
Precautions for LED street light installation
1. Lamp installation and wiring must be carried out when the power is off.
The power cord connector must be insulated and waterproof.
3. Do not energize when the power cover is open to prevent electric shock.
4. The glue in the lamp must not be cut at will, so as not to affect the insulation and heat dissipation.
The above are related matters that should be paid attention to during the installation of LED street lights. If there are still relevant instructions for installing LED street lights, you are welcome to inquire, and you can follow our website to learn more about the consultation.
Benwei Solar Street Lights Outdoor Lamp
Product Features:
>LED light, solar panel, lithium battery and controller,all in one compact design.
>No wiring,100% solar powered ,easy to install and ship.
>Built-in infrared sensor,can adjust the light output automatically(time control + light sensor control+ motion sensor control).
>Rust-proof, dustproof and waterproof IP65.
>5 years warranty.
