How to repair common faults of LED lights
Author: benweilight
Copyright belongs to the author. For commercial reprints, please contact the author for authorization, and for non-commercial reprints, please indicate the source.
First of all, the lamp on this website is guaranteed for five years. If there is a problem with the lamp within five years, it will be repaired free of charge. Website: www.benweilight.com
Common LED lights need to be repaired in the following three situations: LED lights flicker, LED lights dim, and the driver is faulty. When these situations are encountered, how do we conduct inspections and maintenance? Today, benweilight will sort out the common LED lamp maintenance skills for you.
For example: https://www.benweilight.com/ceiling-lighting/square-led-panel/600x600-backlight-panel-led-backlit-panel.html
This product, we will not flicker, because our led panel material is very good.
First of all, we first check whether there is a problem with our own circuit. After ensuring that the circuit is no problem, we must first consider the problem of the LED lamp driver (converter). As soon as the light is turned on, the light is still off, so we can buy a new driver to replace it. Buy www.benweilight.com, there is no problem with the driver, the company's product defect rate is one in ten thousand, and there is a after-sales service guarantee.
The LED light is dimmed: When eliminating the problem of the driver, we need to check whether it is the problem of the lamp beads of the LED light. , Observe whether the lamp bead is burnt, which affects the brightness. If there are not many lamp beads burned, you can consider welding the two welding feet of the burned lamp bead together. If there are many, you need to purchase a new lamp bead board from the center to replace. benwei lighting has its own led chip factory, which will not burn out, www.benweilight.com
LED light flashes: First check whether the neutral wire and the live wire are reversed, if not, check the switch to see if there is any problem with the switch wiring. After the circuit problem is ruled out, the second is to check the flashing light. It may also be a problem with the converter, which should also be checked.
There is no error in the above steps, it may be that the lamp generates self-inductive current. In this case, it must be a bad led light bought from an unreputable company, and the drive is not good enough.
LED lights, in today's society, are already available in every household. It is necessary to understand the common sense of LED light maintenance, prevent them from happening, and prepare for emergencies.
Welcome to test the lights of www.benweilight.com, there are led tube light, led flood light. led panel light and so on.
