Knowledge

Home/Knowledge/Details

How to strengthen the heat dissipation function of LED explosion-proof lamp and its advantages compared with ordinary lighting

Silver and copper are the best thermal conductive materials, followed by gold and aluminum, but gold and silver are too expensive, so at present, heat sinks are mainly made of aluminum and copper. In comparison, both copper and aluminum alloys have their own advantages and disadvantages: copper has good thermal conductivity, but it is expensive, difficult to process, heavy, and the heat capacity of copper radiators is small and easy to oxidize. . On the other hand, pure aluminum is too soft to be used directly. Only aluminum alloys are used to provide sufficient hardness. The advantages of aluminum alloys are low price and light weight, but the thermal conductivity is much worse than that of copper.


In order to strengthen the heat dissipation of the LED explosion-proof lamp, the FR4 printed circuit board in the past was not enough to cope with it. Therefore, a printed circuit board with a metal core inside, called MCPCB, was proposed. The metal with better thermal conductivity such as aluminum or copper was used at the bottom Accelerates heat dissipation, but also has several limitations on heat conduction due to the properties of the insulating layer. For light, the substrate is either transparent enough so that it will not block the light, or a reflective material layer is added between the light-emitting layer and the substrate, so as to avoid the light energy being blocked and absorbed by the substrate, resulting in waste.


Flip-chip inlay, the bare die electrode that used to be above the LED explosion-proof lamp is transferred to the bottom, and the electrode is directly connected to the wire foil at the bottom, so that the heat can be conducted to the bottom faster. This heat dissipation method is not only used for LEDs, but also Today's high-heat CPUs and GPUs have long implemented this approach to accelerate heat dissipation.


Ordinary lighting can't achieve the safety and stability like led explosion-proof light. LED explosion-proof light is very good for this kind of safety. It is difficult to increase the temperature of the light. , then there will be no explosion.


Because the stability of LED explosion-proof lamps is extremely strong, the service cycle can last for three to five years, which can save more cost and labor costs.


Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.