In the manufacturing process, what requirements do LED street lights need to meet?
LED street lights are one of the most widely used street lights so far, because they are more energy-efficient and cheaper than traditional street lights, so they are widely used by us. Low maintenance cost of LED street lights: Compared with traditional street lights, the maintenance cost of LED street lights is extremely low. After comparison, all input costs can be recovered in less than 6 years. The LED street lamp has an automatic control energy-saving device, which can achieve the greatest possible reduction in power and energy saving under the condition of meeting the lighting requirements of different periods. It can realize computer dimming, time period control, light control, temperature control, automatic inspection and other humanized functions. LED street lamp manufacturers ED street lamps have much higher light color rendering than high-pressure sodium lamps. The color rendering index of high-pressure sodium lamps is only about 23, while the color rendering index of LED street lamps is more than 75. From the perspective of visual psychology, it can reach the same brightness and the illuminance of LED street lamps is average. It can be reduced by more than 20% compared with high-pressure sodium lamps. The production of our LED street lights must meet these requirements to better meet the needs of users.
1. The conversion rate of light is 17%, (1000W solar energy per square meter, the actual utilization efficiency is 170W).
2. At present, the street lamp lens materials on the market are all improved optical materials, with a light transmittance greater than 93%, and a temperature resistance of 38-90 degrees.
(3) LED street lamp lens, mainly used for LED street lamp lens, the spot is rectangular, the material is PMMA optical material, the transmittance is ≥93%, the temperature resistance is 38+90 degrees, and the anti-ultraviolet yellow rate is 30,000 hours.
4. The average illuminance of the road surface illuminance uniformity is 0.48. The spot ratio is 1:2.
5. Comply with road lighting. (The actual 1/2 of the central spot is 25lux, the 1/4 of the central light intensity is 15lux, the lowest light intensity at 16 meters is 4lux, and the overlapping light intensity is about 6lux.
6. It has good application prospects in new urban lighting. The depth, color and other characteristics of dimming will not change due to dimming.
7. Adaptation humidity: ≤95%.
8. Quality assurance: 5 years.
Benwei Solar Street Lights Outdoor Lamp
Product Features:
>LED light, solar panel, lithium battery and controller,all in one compact design.
>No wiring,100% solar powered ,easy to install and ship.
>Built-in infrared sensor,can adjust the light output automatically(time control + light sensor control+ motion sensor control).
>Rust-proof, dustproof and waterproof IP65.
>5 years warranty.
