Inspection and maintenance of solar street lamp control
Maintenance of LED rural solar street lights?
1. The detection and maintenance of solar street lamp control, it hurts the time of the lighting fixture of the computer operating system and the change of the brightness of the display. Because each component of the solar road street light system has a different service life, the battery and solar street light control are mainly used to control the saturation and the sunlight exposure time. If the lighting time of the road street light is found to be insufficient, first check the battery consumption Electricity, in addition, check the solar street light control. Each manufacturer’s control panel is equipped with instructions for use, and is generally equipped with operation instructions, so that it can be specifically analyzed whether the solar street light system is working properly.
2. Daily maintenance of solar panels. Solar panels are a key component to ensure resources for the solar road and street light system. Therefore, it is necessary to ensure that the solar solar panels are detailed, the environment is clean and the light collection is good. It is necessary to prevent the solar panels from being harmed by lumps or sharp objects. It is forbidden to throw dirt on the solar panels, clear and inspect them on time, and immediately trim the branches that block the solar panels.
Rural solar street light
3. Maintenance of solar battery. The important includes one is to pay attention to the electronic security door, and the other is to check whether the battery charging of the solar street lamp system is normal-you can refer to the operation of the solar street lamp control for specific analysis. In addition, you can check the battery charging power consumption level of the battery. It is strictly forbidden to adjust the operation of the solar street light control casually to avoid overshoot and out of power of the storage battery.
4. Daily inspection of solar road and street light sources. This one is relatively simple. First or strictly prohibit the impact of bumps and sharp objects. In addition, always check the operation of the light source. Once you find that some LED lamp beads are not bright, you must immediately repair it. To avoid damage to the entire lamp.
