LED explosion-proof light, zone road sealing technology
Explosion-proof led light manufacturer LED explosion-proof light is a structure of LED explosion-proof light that does not agree to generate arcs, flames or high temperatures that will ignite flammable mixtures under normal operating specifications. Electrical equipment that presents these problems. The intrinsically safe LED explosion-proof lamp is an LED explosion-proof lamp that can not ignite the normal flammable mixture due to the electric spark and thermal effect generated by all the power circuits under normal fault conditions. These two kinds of LED explosion-proof lamps may not generate flame and high temperature, and the flame and thermal effect may not be enough to ignite the flammable mixture. Obviously, their explosion-proof function is not related to the protection level of the shell, so the national standard has no special protection level for the shell. requirements.
It can be seen that most of the LED explosion-proof lamps cannot prevent gas or water from entering their interiors, so these LED explosion-proof lamps cannot be directly installed in the open air, and their shells cannot be washed with water. In fact, the moisture-proof function of the LED explosion-proof light is completely determined by the protection level of its shell. Generally, the waterproof level of the LED explosion-proof light shell that can prevent rainwater in swimming suits in the wild should exceed IPX5 (that is, it can withstand water spray from all directions without leakage). When purchasing LED explosion-proof lamps, the requirements for the protection level of the shell should be clearly stated. Another point to pay special attention to is that the LED explosion-proof lamps used in the field should be resistant to corrosion.

The protection of explosion-proof LED lamps needs attention: regularly remove dust and grime on the shell of explosion-proof LED lamps, and improve the light efficiency and heat dissipation performance of lamps; the cleaning method can be based on the protection ability of LED explosion-proof lamps. Wipe with a damp cloth; when cleaning with water, cut off the power supply, and it is strictly forbidden to wipe the transparent parts of the plastic shell of the lamp with a dry cloth to avoid static electricity; check whether the transparent parts have been impacted by foreign objects, and whether the protective net is loose, desoldering, corrosion, etc. If the light source is damaged, the light source should be turned off and replaced in time to avoid long-term malfunction of electrical components such as ballasts due to the inability of the light source to start. One of the very important explosion-proof principles of LED explosion-proof lamps is Restrict the temperature of the surface of the casing, the surface of the parts or the surface of the electronic components in contact with the explosive gas, explosive dust, and the temperature of the surface of the electrical contact below its minimum ignition temperature or ignition temperature. LED explosion-proof lights used in the field need to use waterproof drivers. LED explosion-proof lights used in gas stations need to be shockproof! Technical advantages of LED explosion-proof lamps Explosion-proof LED lamp manufacturers have the advantages of high electro-optical conversion efficiency, low calorific value, low power consumption, safe and low voltage, long service life, and low energy consumption because LEDs are solid-state cold light sources. Power white LED is a very ideal electric light source for explosion-proof lamps, especially portable explosion-proof lamps.
LED explosion-proof lights, road sealing technology; more in line with the national explosion-proof new technology. It belongs to a special industry top-use electrical equipment, which mainly deals with lighting problems. It includes a lamp housing, a lamp shade arranged at the front end of the lamp housing, a luminous body and a battery arranged inside the lamp housing, and a switch arranged on the surface of the lamp housing. : The light-emitting body is a high-power LED module, and a wide-voltage input drive circuit is arranged between the light-emitting body and the battery; the wide-voltage input drive circuit includes a constant current chip, and the constant current chip and the battery form a power module, and the LED module is connected in On the constant current chip, the power module and the LED module are glued together
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




