Led flood light in the design content of the engineering building landscape lighting scheme
The following six aspects should be noted:
The reason is very simple. The distance between LED floodlights is too large. This is partly caused by installation reasons and partly caused by product reasons. Many cheap LED floodlights on the market have a simple structure, and the wires come out at both ends of the lamps, which cannot be hidden, and can only be exposed between two lamps, so the distance is large; and the bottom-hiding type of LED floodlights , the wiring can be hidden at the bottom, there is no distance between the lamps, and there is little dark area for the effect.
The fault test is a very important test item in the product certification test. This test item is to short or open some components on the line to simulate the failures that may occur during actual use, and then evaluate the safety of the product under a single failure condition. In order to meet this safety requirement, when designing the product, it is necessary to consider adding a suitable fuse to the input end of the product to avoid overcurrent and the risk of fire when the output is short-circuited or the internal components are faulty.
The waterproof test should be a test item immediately after the aging test. Only in this way can the actual IP protection level of the Led flood light be tested by imitating the actual environment. This method is generally called thermal measurement. After the lamp emits heat, the lamp will show a phenomenon of thermal expansion and cold contraction. Only this time test can truly test whether the LED floodlight is competent in the harsh outdoor environment and ensure the lamp. Its waterproof and dustproof ability is no problem under the conditions of wind, rain, sun, etc.
① Fully grasp the characteristics, functions, exterior and interior decoration materials, local cultural and historical appearance and surrounding environment of the engineering building, and combine the design concept to design a more detailed design plan and decoration renderings;
②Choose suitable lighting equipment and dmx512 lumen value characteristic trend chart;
③Select the appropriate light source color temperature and light color according to the raw materials of the engineering building;
④Because the raw material of the tempered glass curtain does not return light, the Led floodlight manufacturer can choose the way of internal transmittance lighting equipment or cooperate with the engineering and construction technology professional to embed the power transformer at the connection of the steel bars of the tempered glass. And use the way of large, medium and small line light sources to design and decorate the lighting equipment for the facade;
⑤The common methods of illuminance calculation include the company capacity method, the luminous flux method and the point-by-point calculation method;
⑥ When the urban night scene lighting effect is not made in the first scheme design, the power transformer pipeline should be embedded in the appropriate position of the house, outside and building facade, the roof and the inner side of the tempered glass curtain, so as to be the second part of the urban night scene lighting effect. The sub-scheme design creates convenience, quickness and standardization.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
