LED modeling lamp manufacturers share some common properties of decorative lamps
Like traditional light source lamps, LED lamps also generate heat. The heat of LED lamps comes from the loss in the photoelectric conversion of LEDs and the LED drive power. Different from the light-emitting principle of traditional electric light sources, the light-emitting of LED is electroluminescence. Because of the problem of conversion efficiency, most of the output energy is mainly converted into heat energy in the form of lattice vibration generated by non-radiative recombination. The way of heat transfer in the led is not radiation but conduction. Therefore, an important goal in the heat dissipation design of LED lamps is to effectively conduct the heat of the LED chip and effectively control the LED junction temperature in the LED lamp.
The structure of LED modeling lamp products has been continuously explored and innovated, and the advantages of others have been widely used. Led modeling lights have the characteristics of rich color, safety, energy saving, and strong power. Lighting with different shapes, like dancers on the street, is appreciated as a real object during the day; when night falls, the rich and colorful high-brightness light sources add a bit of quietness and beauty to the night.
The following LED modeling light manufacturers introduce the basic performance of LED modeling lights:
1. The leakage current LED is a single-lead luminous body. If there is a reverse current, it is called leakage current. LEDs with large leakage current have short life and low price.
2. LEDs with different lighting angles have different lighting angles. Special lighting angle, the price is higher. Such as the full diffusion angle, the price is higher.
3. Lifespan The key to different quality is lifespan, which is determined by light decay. Low light decay, long life, long life and high price.
4. The brightness of the LED is different, and the price is different. The LEDs used for LED lamps should conform to the laser class I standard.
5. Antistatic ability LEDs with strong antistatic ability have long life and high price. Usually LEDs with anti-static greater than 700V can be used for LED lighting.
6. LEDs with the same wavelength and wavelength have the same color. If the color is required to be the same, the price will be higher. It is difficult for manufacturers without LED spectrophotometers to produce products with pure colors.




