LED panel light installation FAQ
1. The installation of the product must be a certified technical professional welder.
2. Check the consistency of the product when taking it out of the wooden box.
3. Make sure that there is a minimum distance between commodities and flammable materials. Make sure that the ceiling to be installed has a gap of 2 cm high. All lighting fixtures cannot be installed inside the ceiling or in the corners with pyrogens. Pay attention to the bottom pressure and Separate wiring of high-voltage towers.
4. The connection lines on the lighting fixtures can be fixed with cable clips according to the punching holes and the connection lines behind the lighting fixtures, and it is necessary to ensure that they are fixed firmly.
5. It is necessary to ensure that the power plug of the lighting fixture has sufficient length and does not need to be subjected to supporting force or radial force. When installing the wiring of the lighting fixture, prevent excessive tensile force, and it is not necessary to tie the wiring. The output connection should pay attention to the difference, and do not need to be confused with other lighting fixtures.
6. After installation, connect the bottom-voltage power plug of the lighting fixture with the bottom-voltage power plug of the power transformer.
7. Connect the voltage of the small tail of the power transformer of the lighting fixture. Generally, the dark brown (grey-black) line is the live line and the neutral line, and the dark blue line is the zero line.
8. Non-professional staff are not allowed to carry out disassembly and maintenance. Our factory has the right to provide disassembly and replacement or quality assurance services for the goods that have been disassembled and repaired without authorization.

Disassembly and assembly of led panel light
1. Disassembly and assembly of square panel light
Immediate tend to pull up, it is immediately put on top.
2. Disassembly and assembly of the ring panel light
Pull it down hard, it is a stuck, see the installation instructions, the opposite is fine. When removing the light, pay attention to turning off the power.
3. Disassembly and assembly of the lock panel light
On the four outer frames, unpack the power switch or button.
4. Disassembly and assembly of the integrated panel led light tablet control panel
First use a glass suction cup to buckle down the LED neighbor's splicing, and then it can be removed satisfactorily.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




