LED Tri-proof Light Housing Kit
led line light aluminum profile shell aluminum groove kit
KG-3550 is an aluminum profile shell kit specially designed for the 31mm office gym classroom rectangular project pendant lamp with aluminum substrate, also called U-shaped aluminum groove, aluminum light bar aluminum groove, hard light bar aluminum groove, suitable for different places and venues. , It is suitable for the installation of various ceilings and roofs. It has a wide range of matching spaces. It is suitable for offices, office buildings, shopping malls, conference rooms, study rooms, restaurants, studios, hospitals, schools, billiard halls, leisure bars, canteens and other spaces.
Maybe LEDs are more expensive than traditional light sources, but the light source can be recovered with one year of energy saving, so that the net energy saving period of several times each year in 4-9 years can be obtained. Constant current source driving is the best way to drive LEDs. It is driven by constant current source, and there is no need to connect a current limiting resistor in series with the output circuit. The current flowing through the LED is not affected by changes in external power supply voltage, ambient temperature, and the discreteness of LED parameters. . Therefore, the current can be kept constant and the various excellent characteristics of LED can be fully utilized. The LED constant current power supply is used to supply power to the LED lamps. Since the current flowing through the LED will be automatically detected and controlled during the operation of the power supply, there is no need to worry about excessive current flowing through the LED at the moment of power-on, and no need to worry about the short circuit of the load. bad power supply. LED lights have the characteristics of high efficiency, environmental protection and long life. However, people who use LED lights often will find that because of the high brightness of LEDs, it is easy to turn light energy into heat energy, making LED lights very hot.

.Aluminum alloy casings are various casings made of aluminum alloys. Because of their convenient processing, high flexibility and high grade, they can effectively increase the added value of products and can be widely used in the electronics industry, generally including aluminum profile casings and Aluminum die-cast housing.
④High-tech: Compared with the luminous effect of traditional light source, LED light source is a low-voltage microelectronic product, which successfully integrates computer technology, network communication technology, image processing technology and embedded control technology. The size of the chip used in the traditional LED lamp is 0.25mmX0.25nm, and the size of the LED for lighting is generally more than 1.0mmX1.0mm. The benchtop structure, inverted pyramid structure and flip-chip design of LED die molding can improve its luminous efficiency and thus emit more light. Innovations in LED package design, including high-conductivity metal bulk substrates, flip-chip designs, and die-cast leadframes, have enabled the design of high-power, low-thermal-resistance devices with higher illuminance than conventional LEDs. The illumination of the product is greater. A typical high-flux LED device can produce a few lumens to tens of lumens of luminous flux, and newer designs can integrate more LEDs into a single device.
The aluminum profile shell is a shell processed on the aluminum profile obtained by aluminum drawing. It has high flexibility and can be cut at any depth. Generally, there is a circuit board slot inside. Just insert the circuit board directly, no need to do it again. Fixation and convenience are unmatched by other types of shells, but the aluminum profile shells generally have poor waterproofness and are not suitable for use in the wild and harsh environments. Such shells have broad application prospects.
According to the formula, if the capacitance in the dimming module is reduced, the resistance of the resonant circuit can be increased, which in principle suppresses the oscillation and restores the desired circuit operation. Be careful of the low price trap, the price of LED light sources varies greatly, and the price of LEDs with the same color and brightness can be several times different. This gap is mainly reflected in the reliability, light decay, appearance and technology of LEDs. Inexpensive LEDs have smaller chip sizes and rougher electrodes. The materials used (phosphor and glue) are poor, the current resistance, temperature and humidity changes are poor, the light decay is fast, and the life is short, so the blind pursuit of low prices may not be worth the loss. Recognize relevant standards. From a safety point of view, products should meet relevant standards. Since the LED is a new product, the standard is lagging behind, and only the product is qualified for testing. Therefore, safety certification (such as GS, CE, UL, etc.) is the standard to measure the quality of LED lights, and there are not many manufacturers with safety certification and product quality certificate at the same time.




