1. LED lamp materials are environmentally friendly and recyclable
LED lamps do not contain mercury (Hg), lead (PB), and can be recycled. Explosion proof flashlight is used to provide mobile lighting in fire fighting, power, industrial and mining enterprises and other flammable and explosive places. It is applicable to geological exploration, tourism exploration, border patrol, coastal patrol, disaster relief, field operation, tunnel operation, airport patrol, railway patrol, archaeology and fire command, criminal investigation, traffic accident handling, power maintenance and other field operations.
Led explosion-proof lamp
Reduction of carbon dioxide emissions
For each level of power used by existing lighting equipment, the carbon dioxide content emitted is about 0. Choose 62kg LED lights and lanterns, which can reduce 0. 62 kg 68% 0. The carbon dioxide emission is 42 kg, which plays an important role in environmental protection.
3. Low power consumption.
For example, a set of ordinary 60 cm grating lamps consists of three 20W tubes and three 5W stabilizers, with a total power of 75W.
But please select LED lamp. To achieve the same effect, there are only three 8W lamps without stabilizer. The total power is 24W. According to the experimental test, it is actually lower than 24W.
On the contrary, each set of transmission grid lamps can save 75w-24w = 51w power, which is equivalent to 68% power.
If the enterprise charges about 50000 yuan of lighting electricity per month, choosing LED lighting equipment can save about 30000 yuan of electricity per month, which shows that the energy-saving effect is still obvious.
4. High brightness lighting
An 8W LED lamp is brighter than a 20W conventional fluorescent lamp. This is the basis for testing and comparing field data.
5. Super high life
The service life of ordinary fluorescent lamps is relatively short, ranging from 3000 hours to 5000 hours. The service life of LED lamps is more than 30000 hours, which is 10 times that of ordinary lamps.
6. Wide starting point
The LED lamp can be started when the starting voltage is 90v-260v. Explosion proof searchlights can safely work in flammable and explosive places, and are used for various indoor operation sites, petrochemical devices, operations and fixed lighting requirements of offshore oil platforms, railways, steel, fire fighting, military and government departments. For traditional fluorescent lamps, the voltage is too low, and the lamps cannot operate normally.
7. No delay
The response time of LED lights is nanoseconds. You can turn on the lights without waiting, turn on the lights instantaneously, and switch on and off countless times. However, there is a delay in switching on ordinary fluorescent lamps, and frequent switching on and off will damage the lamps.
8. No LED lamp noise
LED light is quiet and comfortable, without noise.
9. There is no strobe on the LED lamp.
Ordinary fluorescent lamps use an AC power source, so they occur at a frequency of 100 to 200 times per second. The LED lamp directly switches the AC power supply to the DC power supply to protect the eyes and obtain a "soft" lighting environment without stroboscopic phenomena.
10. The lamp material is solid
Traditional fluorescent lamps are basically made of glass, which is fragile and dangerous. Led explosion-proof lamps are made of advanced engineering plastics and aluminum alloys, with built-in semiconductor chips for light emission, no filament, no glass bubbles, no fear of vibration, no cracking, safety and durability.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
