Through the common light distribution design, the light type and luminous point of view of the LED light source can be accurately controlled to avoid light pollution and ineffective light utilization; the light is soft and no glare, which will not cause eye fatigue of operators and improve work efficiency.
The shell is made of lightweight aluminum alloy die-casting, and the surface is treated with high-voltage electrostatic spray.
There is a wiring cavity inside the lamp, and there are special wiring terminals. The user can directly enter the line when the device is in use, and there is no need to set up a separate junction box, which is convenient for the device.
When replacing the lamp, just fold off the end cap, and the lamp can be replaced directly.
How to use:
According to the actual lighting needs of the work site, determine the equipment orientation and method of the lamp, and then prepare the corresponding length of Φ8~14mm three-core cable according to the interval between the lamp and the 220V power supply contact.
Structural features:
1. Explosion-proof cold forging radiator: The material of the radiator is 1070 (pure aluminum) aviation aluminum, and the heat transfer by cold extrusion forming process is 226-237W/M.K, and it is more tightly combined after forging. Thermal conductivity is twice that of conventional die-cast aluminum. The cross section is hollow cylindrical, the heat dissipation area. The electrical appliance heat dissipation cavity and the light source cavity heat sink are combined with multiple heat dissipation structures.
2. Explosion-proof LED lamp electrical cavity: The design eliminates heat transfer with the light source cavity, and adopts a hollow heat dissipation rib structure, which increases the contact area with the air and forms convection. service life.
3. Explosion-proof wiring cavity: The patented design of opening and power-off makes the equipment more convenient. The screw-cover terminals are automatically re-connected and energized, and the open-cover terminals are automatically separated and powered off, and the cables will not be knotted inside the equipment like traditional explosion-proof lamps. , or even twist off to cause short-circuit leakage and other phenomena.
4. Light source cavity radiator: used to dissipate the heat emitted by the tempered glass transparent parts; further reduce the overall temperature, increase the service life of components, and add explosion-proof functions.
1. What are the principles and methods of fire and explosion protection?
The principle and method of anti-living is to try to eliminate the three conditions that cause incineration and blasting.
(1) Control combustibles to prevent combustible gas, vapor and combustible dust from forming explosive mixture with air. Principle, elimination or manipulation of one or more of the three conditions that constitute the incineration, so that the incineration is interrupted. (2) Eliminate the ignition source. (3) Barrier air storage and airtight production.
2. What are the fire arresting equipment?
Protective equipment, signaling equipment, safety equipment, interlocking equipment.
3. What is the purpose of the fire gate?
The flame arrester is set up to prevent the flame from extending along the ventilation duct or production duct. Under normal circumstances, it is in an open state under the control of the fusible metal element. Once the temperature rises and the fusible metal fuses, it will be affected by the weight of the gate itself.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.




