Knowledge

Home/Knowledge/Details

Maintenance and overhaul of LED explosion-proof floodlight

Before installation, the LED explosion-proof floodlight shall be inspected: explosion-proof type, model, grade, grade, waterproof grade of shell, installation method and provisions on installation standard parts.

The LED explosion-proof floodlight shall be firmly fixed. The tightened anchor bolts shall not be replaced at will. Spring washers shall be provided. The anti fouling and moisture-proof sealing ring shall be kept in its original state during installation. At the three-phase five wire position of the cable, the cable and the gasket shall cooperate with each other, the cable section shall be annular, and the surface of the grommet shall be free of defects such as convex and concave Unnecessary three-phase five wire ports must be plugged according to the explosion-proof type, and the lock nut must be tightened to make the three-phase five wire ports airtight.

During normal maintenance, the following points must be noted:

1. The LED explosion-proof floodlight and lampshade shall be able to automatically disconnect the switching power supply before opening. However, as the setting of interlocking equipment is complex and difficult to complete, most lamps are only marked with warning signs such as "no inductive charging", "on" at conspicuous places of the housing. And because the external temperature of the bulb is still very high after the power is turned off, if the lamp cover is opened immediately, there is still a risk of igniting flammable vapor compounds (the key is the explosion-proof structure), so fluorescent lamps, high-pressure mercury lamps, metal halide lamps, etc. This should be paid attention to for lighting fixtures with high bulb surface temperature and quick cover opening.

2. Cey-1 explosion-proof fluorescent lamp has an interlock mechanism for opening the cover and closing the power supply, which provides convenience and safety precautions for maintenance. Because fluorescent tubes are cold light lamps, there will be no high temperature on the surface. Turn off the power and open the cover immediately. When replacing the bulb (tube), the explosion-proof welding surface of the LED explosion-proof floodlight shall be properly maintained and shall not be damaged.

3. The cleaned explosion-proof surface shall be coated with phosphating treatment paste or 204-1 rust inhibitor, and other paints are prohibited. There shall be no rust layer on the flameproof surface. If there is slight corrosion, there should be no surface condition after cleaning. The sealing ring used for pollution prevention and moisture-proof must be kept intact, which is very important for explosion-proof lamps. If the sealing ring is seriously damaged, replace the sealing ring with the same specification and material, and replace all lamps if necessary.

4. Pay attention to whether the lamp cover is intact during maintenance. If cracks appear, they must be removed and replaced immediately.

5. The basic principle of the LED explosion-proof floodlight is the same as that of the explosion-proof lamp, except that the LED lamp beads are led lamp beads, which are used to avoid igniting the surrounding combustibles such as flammable smoke, natural environment, flammable steam, natural environment, coalbed methane, etc.

What are the protective measures for LED explosion-proof floodlights? In the specific operation of LEDs, the current is limited to 20 MAH, but generally speaking, the current will increase during the whole application process for various reasons. After a certain time and force, the current will be damaged. Therefore, we should pay more attention to the service life of LED explosion-proof floodlights.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.