Matters needing attention in maintenance of led flood light
When it comes to Led floodlights, everyone knows that it relies on solar energy to turn on the lights. It opens at dark and closes at dawn. Many people do not understand how the lighting time of Led floodlights is controlled. Therefore, the editor of the LED flood light manufacturer will focus on this problem and give you a brief analysis of how the LED flood light controls the lighting time.
The solar street light control of Led flood light wholesale is completed by the solar street light controller. There is a light control point voltage in the Led flood light control controller, which is generally set to 3v or lower. When the sunlight weakens, the received voltage of the controller will continue to drop. When it drops to the set point, the controller gets a dark signal and connects the battery to the light source. At this time, a complete circuit loop is formed, and the LED light source is lit; when the light gradually increases and reaches a certain voltage, the controller will think that it is dawn, and will disconnect the battery and the light source circuit, connect the battery and the photovoltaic panel circuit, and let the photovoltaic panel Charge the battery, then the light source light will turn off.
Real-time control refers to the time of turning on the lights every day, for example, turning on the lights for 4 hours, 5 hours, 6 hours, and 12 hours a day. The controller has the function of light control + time control, automatically turning on the lights when it is dark, safe and energy saving, green and environmental protection, stable and reliable, no manual operation, power saving cost and free maintenance. Generally, the LED flood light controller does not have a built-in clock, and generally does not run according to the clock. The turn-on time is generally triggered by monitoring the power generation current value of the solar panel to trigger the turn-on circuit. The current value is generally set to 5ma. The value can be adjusted accordingly with the usage time of the solar panel;
For lights not installed, there is no need to deal with them. Only punctual care and maintenance are required to guarantee a longer service life. LED floodlights run outdoors for a long time, and the dust on the surface of the lamps will inevitably increase day by day. If the accumulated dust is not cleaned up in time, it will affect the brightness of the lamp.
1. In the daily routine inspection, if the glass cover is found to be cracked, it should be removed in time and returned to the factory for maintenance, so as to avoid future troubles.
2. The LED flood light has been outdoors for a long time, and it is unavoidable in case of strong wind and rain. Assuming that the projection angle of the lamp changes, it is necessary to adjust the appropriate illumination angle in time.
3. When using LEDLed flood light, try to use it in accordance with the standards and guidelines provided by the lighting manufacturer. As for electronics, there is no guarantee that they will not be damaged. If the lamp tube is found to be damaged, it should be removed and repaired in time. Maybe replace.
4. Regarding the LED flood light, although it has a longer service life than ordinary street lights during use, if it is maintained on time, its service life will be longer.
Whether a product is good or bad, its use value must also be rich. Only with proper maintenance can adjustments be made to better meet the needs of users.
The significance of using solar light projection is also to provide convenience for the majority of users. Taking good maintenance measures to extend its lifespan is also a way to save money.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
