The LED line lampshade is made of 6063 aluminum profile, which has high thermal conductivity and a high-end and exquisite appearance. It uses 5050 chip LEDs imported from the United States. Suitable for jewelry, display cabinets, home villa lighting, shopping malls, hotels, office buildings, leisure clubs and other lighting places. It is an ideal light source to replace traditional fluorescent tubes.
1. Anti-static: Since the LED is a slow-static component, if the LED strip is repaired without anti-static measures, the LED will be burned out, resulting in waste. Therefore, it is necessary to pay attention to the use of an anti-static soldering iron. At the same time, maintenance personnel must also take anti-static measures (such as wearing anti-static rings and anti-static gloves).
2. Short circuit: Many LED lights do not light up because the feet are short-circuited. Before repairing, we need to investigate the real reason for their absence. Otherwise, after replacing the non-lighting LED, when the power is turned on again, the chip that constitutes the LED will be disconnected due to the short-circuit DC impact. Because, before replacing a new LED, we must first find out the real reason why it does not light up, and only with a clear goal can we achieve half the effect.
3. Continuous low temperature: The two main components of LED strips are LED and FPC, which are products without continuous low temperature resistance. If the FPC continues to be low temperature or exceeds the acceptance criteria, it will cause the FPC cover film to rupture and indirectly cause the LED strip to be scrapped. Likewise, LEDs cannot sustain low temperatures. If you work at low temperature for a long time, the chip will burn out at low temperature. Therefore, the electric soldering iron used for the maintenance of LED light strips must use a temperature-controlled electric soldering iron, which is limited to one degree, and is not allowed to be replaced or set at will. In addition, even so, pay attention to whether the soldering iron must stop working at the LED pin for more than 10 seconds during maintenance. If it exceeds a certain time, it is easy to burn out the LED chip.
The common installation locations of LED light strips are halls and restaurants, but it does not mean that light strips cannot be installed in other places, but the installation requirements in other places are more refined than those in halls or restaurants. LED light is an electroluminescent semiconductor material chip, which is cured on the bracket with silver glue or white glue, and then connected with the chip and circuit board with silver or gold wire, and sealed around with epoxy resin to protect the inner core wire, Then install the housing, so the shock resistance of the LED light is good.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
