Panel light installation method How to install the panel light?
The panel light is a high-end indoor lighting fixture. The design of the whole fixture is beautiful, simple and luxurious. It has a good lighting effect. There are many people who choose this type of fixture. However, many people do not understand the installation of this type of fixture. Many, so what are the installation methods of panel lights? How to install the panel light? Now, Benwei light will explain it for everyone, let's take a look.
Panel Light
Panel light installation method:
1. LED panel light installation-bracket fixed
(1) First, make a few screw holes in the ceiling. This needs to be measured in advance, and then it is best to mark the corresponding places. Pay attention to the depth of the holes and the distance between the holes.
(2) Slide the LED panel light into the ceiling frame, and then install it on the ceiling. It needs to be fixed on three sides, and then slide the panel light into the fixed slide-in mounting frame. When it reaches the predetermined position Then, screw on the fourth side of it, and then fix the frame.
2. LED panel light installation-wire hanging type
(1) Fix the hanging wire installation parts on the ceiling first, lock the screws at the corresponding position, and hang the components on the back of the LED panel light after the hanging wire is vertically down.
(2) If you encounter something you don't know during the installation process, you can read the manual first, and then operate according to the prompts, or consult the customer online, it will give you an accurate answer.
3. LED panel light installation-embedded
(1) Install the sheet metal groove on the predetermined position of the ceiling, and then fix a few outwardly protruding brackets on the back of the led panel lamp, and put the panel light in accordingly. As long as the hand is strong, be sure to place it.
(2) Make the bracket and the sheet metal groove on the ceiling completely match, and then use the matching screws to fix it on the ceiling. Because the thickness of various ceilings is different, there are some differences, so it is necessary to adjust the light surface and the bracket appropriately. The height, otherwise it is easy to cause the LED panel light to have the other side whose height is not on the same level after the LED panel light is installed.
Panel Light
How to install the panel light?
1. There are brackets for surface installation. First, drill a few screw holes in the ceiling to fix the brackets on the ceiling.
2. Install the slide-in ceiling frame of the LED panel light on the ceiling and fix it on three sides.
3. Then slide the panel light into the fixed slide-in mounting frame, and then screw the fourth side to fix the frame.
Several issues need to be paid attention to when installing surface mounted panel lights:
1. Please make sure that the power has been cut off before installation;
2. Pay attention to waterproof, electric and shockproof;
3. The product uses standard working voltage, please do not exceed the working voltage range;
4. This product is for indoor use only;
5. Please read the instructions carefully before installing the product.
Panel Light
The above is an introduction to the installation method of the panel light and how to install the panel light. I believe you will know more about it after reading it. The content is for reference only, and I hope it can be helpful to everyone.
