LED purification lamp installation precautions:
1. To install the LED purification lamp, it is necessary to connect the 220-volt alternating current, which is dangerous. Therefore, when installing the purification lamp, a professional electrician is required to wire the power supply.
2. Before installing the LED purification lamp, take out the LED purification lamp and other accessories of the purification lamp from the packaging box, and strictly check whether the LED purification lamp and accessories are not missing.
This can prevent the sudden discovery of a missing component in the process of installing the led purification lamp, which makes it impossible to continue to install the purification lamp.
If you find that the LED purification lamp has missing accessories, you can contact the purification lamp manufacturer in time to reissue the missing purification lamp accessories.
purification lights, led panel lights, purification panel lights, purification lamps
3. When installing and designing the LED purification lamp, it is necessary to design fire isolation. There must be at least a 20 cm separation distance between the purification lamp and the flammable materials that are easy to ignite, in order to prevent a fire caused by a safety failure of the wire. This is very important, please do as required.
At the same time, it should be noted that when connecting the purification lamp wires, it is necessary to avoid the low-voltage wires and the high-voltage wires being too close together, and the wiring must be separated, so as to ensure the safety of electrical appliances.
4. At the same time, pay attention to the heat dissipation space of the purification lamp.
Above the zenith where the LED purification lamp is installed, there should be at least a 2 cm high gap. The purification lamp cannot be completely installed inside the zenith or on the wall with a heat source, so as to ensure the smooth heat dissipation of the purification lamp.
A good heat dissipation environment will help prolong the service life of the led purification lamp.
led arc purification lamp, led arc lamp, purification lamp
5. When installing the LED purification lamp, the above connecting line can pass through the hole on the purification lamp. Generally, the regular purification lamp manufacturers will reserve threading holes when producing the LED purification lamp.
It is best to use wire clips or cable ties to fix the wires behind the led purification lights to ensure that the wires are firmly fixed.
6. While fixing the wires, the power cord of the LED purification lamp should not be pulled too tightly to ensure that the power cord is not stretched by tension or tangential force.
If the wire is stretched too tightly, the wire may be deformed, the resistance will increase, and the power wire will age rapidly, which may cause a fire for a long time.
There should be some room for the wires to avoid the dislocation of the purification lamp in the future or other reasons, which will cause the power connection line of the purification lamp to break.
When installing the power cable of the purification lamp, do not use too much force, and do not tie the wire unless necessary.
When outputting the power connection line of the purification lamp, pay attention to distinguish it, and do not confuse the connection of the purification lamp with the connection of other electrical appliances, resulting in a human safety accident.
LED purification panel light assembly structure
7. After installing the LED purification lamp, connect the low-voltage plug of the switching power supply of the purification lamp to the low-voltage plug of the purification lamp, and do not connect it wrongly.
8. The mains incoming line of 220V voltage is connected to the tail line of the switching power supply of the LED purification lamp. Usually, in the connection wire, the brown (black) wire is the live wire, and the blue wire is the neutral wire.
9. After installing the LED purification lamps, non-professionals please do not disassemble the purification lamps. If there is a fault and need maintenance and after-sales, please contact the LED purification lamp manufacturer in time. As a professional purification lamp manufacturer, we provide 3-5 years of after-sales and quality assurance services for Junshuo led purification lamps. And some low-end purification lamp manufacturers usually only provide 1-2 years of after-sales service.
If you disassemble and repair without permission, causing man-made damage to the LED purification lamp, the LED purification lamp manufacturer has the right not to replace it, and has the right not to provide warranty services for this situation.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
