Several installation methods of explosion-proof high bay lights
1. Boom type
First of all, it is necessary to carry out the installation of pre-embedded lines and electrical boxes. After installing the lamps according to the detailed design and construction plan, the ceiling is constructed to ensure the combination of lamps and ceilings, and then fixed installation with bolts.
2. Ceiling type
Pre-embed the junction box at a fixed point, clean the junction box, and mark the junction box. The fixation of the led explosion-proof factory lamp requires a lamp hole at the top of the factory head, and the lamp can be fixed with an expansion bolt.
3. Wall-mounted
The wall-mounted installation of led explosion-proof high bay light is the same as the installation of home wall-mounted lamps. The circuit is pre-buried in the early stage, the factory lights are installed, and then the lamps are fixed. An electrical box is also required to provide power for the lamps.
Four. Seat
The installation method of the LED explosion-proof high bay lamp holder is similar to the previous two methods. First, the wiring is pre-buried, the lamps are installed, and bolts are used to fix them. The installation should be carried out in full accordance with the construction design drawings and detailed plans.
5. Bracket type
The bracket-type installation of the led explosion-proof high bay light is a convenient installation method. It is equipped with a bracket and then fixed with an expansion screw on the wall. It is very convenient. Generally, the bracket-type replaces the wall-mounted type. The advantage is that the angle can be adjusted up and down. Generally, LED explosion-proof floodlights are basically installed with brackets.
Six, guardrail
The guardrail type is usually composed of a 2.5-meter curved rod, which is directly clamped to the guardrail by a U-clamp. The base is directly connected to the explosion-proof junction box.
7. Flange
There is basically no difference between the flange type and the guardrail type. It is also a 2.5-meter-high curved rod. The difference is that it has more bases than the guardrail type. It can be directly fixed on the ground without a U-shaped card. fixed.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
