Several reasons for choosing to use LED panel lights
1. Low energy consumption: If a company's monthly lighting electricity bill is 100,000 RMB, then if LED is used, it only needs about 30,000-40,000 RMB per month, and the effect is quite obvious.
2. Carbon reduction: For every 1 kWh of electricity used, the carbon dioxide content emitted is about 0.62 kg. Compared with the selection of LED panel lights, the carbon dioxide emission of 0.62 kg × 68% = 0.42 kg can be reduced, which plays a great role in the protection of the ecological environment.
3. Environmental protection: LED lamps do not contain mercury (Hg), lead (Pb), and are recyclable. It can be seen from the above three points that this product responds to the country's call for low carbon, energy saving and environmental protection.
4. high brightness.
5. Long life: The life of ordinary fluorescent lamps is short, about 3000-5000 hours. The service life of LED panel lights is more than 30,000 hours (3-5 years), which is equivalent to 10 times the life of ordinary lights.
6. Wide startup: The startup voltage of the LED panel light is 100V-240V. For ordinary fluorescent lamps, if the voltage is too low, it will not light up and cannot be started normally.
7. No delay: The response time of the LED light is in nanoseconds, no need to wait to turn on the light, it lights up instantly, and it can be turned on and off countless times. However, there is a delay process when ordinary fluorescent lamps are turned on, and if they are switched on and off frequently, the lamps will be damaged.
8. No noise: LED panel light does not make noise, quiet and comfortable.
9. No stroboscopic: Ordinary fluorescent lamps use alternating current, so 100-200 stroboscopic flickers occur per second. The LED light directly converts alternating current into direct current, which does not produce stroboscopic phenomenon, protects the eyes, and obtains a "soft" lighting environment.
10. Solid material: ordinary fluorescent lamps are made of glass, which is fragile and dangerous. The LED lights are made of high-grade engineering plastics and aluminum alloys, built-in semiconductor chips to emit light, no filament, no glass bubbles, not afraid of vibration, not easy to break.
11. Reduce labor costs: reduce wear and tear Ordinary fluorescent lamps will frequently break many roots within 3-5 years, and when broken, an electrician should be asked to replace them with new ones, which wastes manpower and increases wear and tear. Small amounts can also accrue large fees. For LED lamps, the service life is 3 years, that is to say, in these 3 years, the lamps will not be damaged. Even if there is a problem, you can ask the manufacturer to help you solve it, which saves labor costs without increasing losses and reducing business burden.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
