Knowledge

Home/Knowledge/Details

Solar LED Street Lighting Control System

Solar energy, as an inexhaustible and unpolluted clean energy, has been recognized as the most effective energy source for solving the energy crisis in the future. LED lamp has long life, efficient energy saving, environmental protection and other advantages. Therefore, the solar energy and LED street lights organically combined together, the development of solar LED lighting controller is very important. At present, a lot of solar controller in the market, are charged with direct charging mode, no management control of the battery, resulting in low energy utilization, not strong reliability. LED Street Light


The dual buck illumination controller based on STC12C5410AD is designed in this paper, which uses the maximum power point to charge and fully utilizes the energy of solar panel to charge the battery. Prevent battery false full of phenomenon; The LED street lamp adopts two-section constant current control to enhance the life of LED lamp, realizes a kind of environmental protection and energy saving illumination mode, solves the defect of some solar controller in the market, is a kind of high price product. LED Street Light


Double Buck Solar LED street lighting control system principle. The system includes: solar cell, voltage and current acquisition module, Synchronous Buck module, battery, LED street lamp and STC Intelligent Controller. Solar cell components to provide energy for the system, by collecting the voltage on the solar panel to distinguish between day and night, when the voltage of the test board is higher than a certain value, enter the daytime mode, at this time: STC Intelligent controller through the acquisition of the solar panel at both ends of the voltage and charging current, control synchronization buck work, to achieve the battery mppt (maximum power point tracking) charging, when the battery voltage reaches a certain value, In the floating charging mode, real-time acquisition of the voltage at both ends of the battery to prevent overcharge, overcharge; When testing the battery voltage is less than a certain value, into the night mode, at this time: open and control the back-level synchronization buck circuit, to achieve the constant current control of LED street lamp. LED Street Light