Solar street lights are displayed mainly because these points have not been done well!
News details
Street lights are very common in rural areas. Rows of street lights during the day are both beautiful and vivid. These street lights of different shapes light up the dark night, illuminate the road ahead for people traveling at night, and make it convenient for people at night. Travel. However, with the installation and use of solar street lights in large areas in rural areas, such a situation has emerged. There are more and more street lights, and the night in the countryside is getting darker and darker, just like a "vase".
Today we will talk about how to install solar street lights to prevent them from becoming decorations?
1. Friends living in the countryside know that there are many trees in the countryside and the construction of buildings is irregular. Therefore, when designing and installing street lights, you must first check whether there are trees and buildings on both sides of the road. Photovoltaic modules use light to generate electricity. If there are trees or buildings around it, it may affect daylighting and affect its normal power generation. It is necessary to consider the distance between these obstructions and the installation location of the street light, so as to ensure that there is no obstruction between 9 am and 15 pm.
2. Observe whether there are cables, wires or other facilities that affect the installation of the solar street lamp at the installation position of the solar street lamp. It is strictly forbidden to install the solar street lamp under the high-voltage line. There were news reports before that because the street lamps were installed under the high-voltage line, the upper high-voltage line was burnt indirectly due to the failure of the street lamp equipment and burning, causing huge economic losses.
3. Speaking of solar street lights, they are mainly composed of solar cell components (crystalline silicon, amorphous silicon), fans, component brackets, light sources, controllers, batteries, light poles, etc. and other parts. During construction and installation, check whether there are cables, optical cables, pipes or other facilities that affect the construction of the base of the street lamp and the underground of the battery compartment, and try to avoid the above facilities during installation.
4. In addition to the above problems, attention should be paid to the installation environment during construction. Try to avoid installing in low-lying areas or areas that are likely to cause water accumulation, because the street lamp foundation will be in water for a long time, which will make the foundation unstable and damage the service life of the street lamp.
5. The most critical factor affecting the life of street lights is the choice of equipment. Battery components, accumulators, controllers, etc. are involved here. Try to choose components from major manufacturers.
Solve the problem of site selection, installation and construction, equipment selection, and later operation and maintenance, solar street lights can really give full play to its unique advantages, and truly benefit the countryside and the people.
As the leading brand of solar street lamps, Benwei quickly occupied the urban and rural street lamp market with its energy-saving and environmentally friendly products. In addition to installing the street lamps, they must also ensure that these lamps can be bright. In accordance with the requirements of "scientific, strict, meticulous, and efficient", the company has always played a "combined punch" that comprehensively regulates and improves the level of street lamp management and protection. The consciousness of "serving the people" has been deeply imprinted in the heart of the street lamp "serving the army", as a beacon shining every footprint of the people of the world in serving the people's livelihood.
