LED garden lights are a kind of outdoor lighting, the light source is the use of new LED semiconductor as a light body, usually refers to the following 6 meters of outdoor road lighting, the main components from: LED light source, lamps, poles, Plate, foundation embedded parts 5 parts, because the LED garden lights with its diversity, aesthetics with landscaping and decorative environment characteristics, it is also known as the landscape LED garden lights.LED Garden Light
LED has: energy saving, high efficiency and other characteristics, mainly used in urban slow lane, narrow lane, residential area, tourist attractions, parks, squares and other public places of outdoor lighting, to extend people's outdoor activities time and improve property safety.LED Garden Light
LED garden lights mainly composed of five major components:
1, LED light system: LED light source system includes: heat, with light, LED module.
2, lamps: lamps installed within the LED lighting system. Cut line to do the wire, take 1.0mm? Red, black copper multi-strand line, the cut 6 section 40mm, both ends of the stripping head 5mm, and soaked tin. Do light board lead, take YC2X1.0mm? Two core line, cut a section of 700mm, the inner stripped of the skin 60mm, brown line stripping head 5mm, dip tin; blue line stripping 5mm, dip tin. The outer edge of stripping the skin 80mm, brown line stripping head 20mm; blue line stripping head 20mm.LED Garden Light
3, light pole: LED corridor light pole main materials are: equal diameter steel pipe, the opposite sex steel pipe, equal diameter aluminum tube, cast aluminum poles, aluminum pole. The thickness of the selected material is divided into: wall thickness of 2.5, wall thickness of 3.0, wall thickness of 3.5, thickness of 3.5, thickness of 3.5, thickness of 3.5, (The above is the conventional size)
4, the flange and the basis of embedded parts: the flange is LED corridor lights and ground installation of the important components. LED garden lights installation method: the installation of LED garden lights, the need to provide manufacturers according to the standard flange size, the use of M16 or M20 (commonly used specifications) screw welding into the base cage, and then at the installation site, by digging the appropriate size of the hole , The basic cage placed therein, the level of correction, the use of cement concrete to water the fixed base cage, 3-7 days after the cement concrete fully solidified, you can install the garden lights. (Note: LED courtyard lamp foundation pouring need to draw the pipeline).LED Garden Light
