The use of led line lights in the lighting market will continue to improve
d Linear lights should far exceed energy-saving light bulbs in seismic and lightning protection performance. The voltage instability of continuous switching on led line lights is far less than the impact of energy-saving lamps. If the energy-saving lamps are frequently switched on and off, the service life can be greatly shortened.
Compared with the two kinds of lamps, led line lights are not as good as ordinary energy-saving lamps in terms of heat dissipation performance. The heat dissipation of led line lights is not very good, which is the defect of LED lights, but now manufacturers have overcome this defect of LED lights, and the development of radiators has also made great progress.
Generally speaking, led line lights are stable and not easy to damage, energy saving and environmental protection. In the long run, the use of led line lights in the lighting market will continue to improve. Every 100-yuan store must also seize the opportunity and actively respond to market demand.
The reason is very simple. The distance between the LED line lights is too large. This is partly caused by the installation and partly by the product. Many cheap line lights on the market have a simple structure, and the wire ends come out at both ends of the light fixture, which cannot be hidden, and can only be exposed between two light fixtures, so the distance is large; while the line lights with hidden lines at the bottom are all connected to the wiring. It can be hidden at the bottom, there is no distance between the lamps, and there is little dark area for the effect.
The fault test is a very important test item in the product certification test. This test item is to short or open some components on the line to simulate the failures that may occur during actual use, and then evaluate the safety of the product under a single failure condition. In order to meet this safety requirement, when designing the product, it is necessary to consider adding a suitable fuse to the input end of the product to avoid overcurrent and the risk of fire when the output is short-circuited or the internal components are faulty.
The waterproof test should be a test item immediately after the aging test. In this way, the actual IP protection level of the LED linear light can be tested by imitating the actual environment. This method is generally called thermal test. After the lamp emits heat, the lamp will show a phenomenon of thermal expansion and contraction. Only at this time can the test really test whether the LED line lamp is competent in the harsh outdoor environment and ensure that the lamp is in Its waterproof and dustproof ability is no problem under the conditions of wind, rain and sun.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
